Beschreibung

• Description of display parameters: (structure size: long 225mm X width 176.5mm X thick 135mm) I: LCD panel: 1. Resolution 2048 (RGB) 1536 2. Display area 196.608 (horizontal) 147.456 (vertical) mm 3. Appearance dimensions: 208.88 (horizontal) 167.12 (vertical) 5.17 (thick) mm 4. Open area-surface treatment mirror surface (Haze 0%), Hard coating (3H), anti-reflection treatment 5. Display brightness 440 cd / m² (Typ.) 6. Contrast 800:1 (Typ.) (transmission) 7. Recommended perspective full perspective response time 16 (Typ.) (G to G) ms 8. Visual Angle 80 / 80 / 80 / 80 (Typ.) (CR 10) left / right / up / bottom 9. Display mode IPS, often black display, transmission type 10. Frame frequency 60Hz built-in MEMC circuit touch technology without touch Two: Common parameters of the display screen drive motherboard: 1: The drive board supports USB-5v voltage input, can use mobile phone charger, mobile treasure, computer USB interface as power supply; 2.1:3.5 Headrack for audio output 2.2: Support HDMI signal input, use MINIHDMI stent for HDMI 1.4 2.3: The thickness of the drive plate is controlled at 5MM 2.4: The potentiometer uses wave wheel button, three-in-one function, menu, plus and subtraction, compound brightness and volume 2.5: The headphone holder is used for audio output, which can be used with ordinary 3.5 headphones, and can also be connected to the external power amplifier device 2.6: Touch pad is defined as 1.25-4P (not used) 2.7: The amplifier output double channel, defined spacing is 1.25-4P 2.8: The LCD interface is a dual interface defined by EDP30PIN + EDP40PIN, and the output interface shall be confirmed by software upgrade 2.9: Car two-color LED light 3.0: Power supply power is 2X2W 3.1: Signal channel HDMI and TYPEC, subject to automatic identification, automatic conversion and subsequent signal access. Three: configuration list 1. 1 monitor 2. HDMI HD line 1 3.USB TO TYPEC, with 1 power supply line 4.1 unit with USB power supply

• 
• 
• 
• 

Rückmeldung