Beschreibung

• Upgrade Heat Bed PEI Sheet Coated Spring Steel Plate 180/220/235/310mm without Magnetic Base 3D Printer Parts For Ender 3/5 Pro CR10/20 Advantages: Never warp& Never rust. Easy to get the first layer even for a new user Flexible, Removable, stick to magnets very well Suits variety of filaments, especially for PLA Free clean- just flex the plate a little then take the prints off after cooled Fast heater performance, less waiting time after printing. A lifetime 3D printer bed Instructions: 1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness) 2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles 3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base 4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C). 5. Take off the printing surface and bend it gently to achieve easy demoulding

• 
• 
• 
• 
• 

Rückmeldung