Description

• Luminous tape directions for use: 1, before using, please put the product on a fluorescent lamp or other gentle irradiation for 20 - 30 minutes, after turning off the light,you can see the sparkling impact Products must first take up the light, put out the lamp,then will shine, if it's used for performance: we recommend that the performers put on black clothes, with a black light illuminate, make darkish impact first earlier than utilizing the product, and please let the tape soak up the light about 20-30 minutes, then immediately go to one the stage,the effect is healthier colour is evening luminous effectLuminescent Value:Initial lighting fixtures source is 1000LX, Activating time is 15 minutes,Luminescent value at 5 seconds ≥ 4000 mcd/m2Luminescent cost at 30 minutes ≥ 15 mcd/m2Luminescent price at 60 minutes ≥ 8 mcd/m2Luminescent cost at 300 minutes ≥ 1 mcd/m2Optical garage time:4 hours Service Life: Indoor about 8 years, outside about five yearsAvailable color: light green,green,blueOther technical datas:1 Surface Film: PET type2 Thickness of film: 0, Thickness of Glue:0 04mmThickness of Release Paper: 0, total thickness of products: 0 thickness is with allowance of 5% more or less3 Weight of Release Paper: 160g/sqm with 5% extra or less4 Type of Adhesive: Pressure-Sensitive Type5 Strength of Adhesive: after sticking to the board for 24 hours, on the situation of 0, 5min, total length: 10cm, the falling Length≤ 2cm6 Operation temperature: 10 c----30 c7 Working temperature: -20c --- 60c(after sticking to the board for a minimum of 7 days)8 Storage temperature: zero c----30 c

• 
• 
• 
• 

Review