Model: OX-4505X
Power: 15W
Wavelength: 450nm
Size: 60 * 70MM
Voltage: 12V
Engraveable materials: wood, plastic, paper, brushed stainless steel (please use a massive pen to paint the skin black before carving)
Other metal, transparent, semi transparent, and silver reflective materials can't be carved
Cutting materials: paper, wooden boards as a lot as 3MM (slow speed, requiring repeated cutting), leather, fabric, and so on
Any metal, transparent, semi transparent, and silver reflective supplies can't be cut!!!
Before buying, you need to read:
1. The laser strength module is comparatively large, so eye contact is prohibited, in any other case everlasting blindness may perhaps occur, and the implications are natural
2. Do no longer use in flammable and gasoline surroundings to avoid fire and explosion.
3. Children are prohibited from entering contact with this laser product.
4. This laser solely comes with one 3PIN cable, one 3Pin to 4pin connection cable, and one laser. It is suitable for direct installation on the engraving machine. If you must directly hook up with the power supply, please train a 12V 5A energy cable yourself, deliver to a halt the DC plug of the power cable, after which bring to a halt one end of the 3PIN cable. Connect the pink twine to the crimson wire, the black wire to the black wire, and the yellow twine would not ought to be used Then do a good insulation treatment, and you'll plug it into the socket and lightweight it up instantly
5. Do no longer open the module to stop damage. Buy and provides away protective eyes