Wait... We know what you are thinking..."WHAT SHOULD I USE THESE FOR?"Well, we've something for youYou may also wish to use adhesion promoter with some pleasant tapeswith links below :)ADHESION PROMOTER + TAPES = BEST BUDDIES EVERWhy use primer?- Prime guarantees better adhesion of paint to the surface, expand durability, and give extra protection for the fabric being painted.- It allows things to adhere far better than utilizing another adhesive supplies alone.Features:- The preliminary viscosity is terribly strong, and it would reach the destruction level in a brief time.- This product is suitable for: rain shield, handle, door bowl, window trim, anti-collision tape, lampshade, fuel tank cover, rear shield, middle mesh trim, welcome pedal, EPDM / TPE rubber seal Other car amendment parts.Tips for using:- Surface Preparation: The bonding floor ought to be relatively clear and dry. Contaminated surfaces needs to be cleaned with a 50/50 Isopropyl Alcohol and water mixture.- Make sure the primed surface stays unfastened from contaminants earlier than you practice the tape.-This isn't always glue and cannot be used as glue alone. Adhesion promoters are used to better bond the tape. You need to practice it on tape or any adhesive.So Need to be used together with double-sided tape for greater use.The leading aim of the primer is to strengthen the adhesive impact of films, tape or different self-adhesive materials. Primer - -an indispensable assistant at the vehicle wrapping vinyl film! Without it, no authentic work done.Clean-up:Primer can eradicate residual glue. Need to clean vigorously.Primer Instructions:Step 1: Prepare the primer.Step 2: Apply the primer to a clean, dry floor (simply ''paint'' the spot)Step 3: Allow the primer to absolutely dry for 5 minutes.Step 4: Apply the tape productStep 5: Allow 72 hours of stay time earlier than us.(80% Increase Viscosity)Tapes+ primer Time:After application, the bond power will increase as the adhesive flows onto the surface. At room temperature roughly 50% of final bond power will be done after 20 minutes, 90% after 24 hoursand one hundred pc after 72 hours.