Describe:1. Material: The shell is made from aviation-grade aluminum alloy, which is wear-resistant and anti-drop.
2. Lamp cup: adopt glass lens design, stable penetrating power, nice lamp bead condensing effect, bigger brightness.
3. Process: The floor adopts three-level hard anodizing assignment to forestall rust and corrosion.
4. Lock: When you get keep of the flashlight, it's best to press the two change buttons at the same time to liberate it, and press the 2 switches on the identical time to enter the lock mode to stop by chance turning at the flashlight.
5. Bracket: The hole design of the digicam bracket can use a handle bracket or a round bracket, which is terribly handy to use.
6. Waterproof: All the connections of the product undertake strain rubber ring, in order that the rubber ring and the flashlight are in shut contact. The apron bears more strain and has larger waterproof effect. In our maximum in-depth tests, the water resistant level has reached the PX8 water-resistant level, and the flashlight can work veritably below 100M water(please tighten the charging gap screws before diving to forestall water ingress).
7. Type C charging: Unscrew the screw, you need to use the 5V cellular phone charger to fee the flashlight. During the charging process, the exchange indicator light will flip red, and when the battery is completely charged, the exchange indicator soft will flip blue.
8. Switch indicator:(1) When the battery calories is low, the indicator mild is red; when the battery strength is high, the flashlight is blue.(2) When the battery strength is low, the indicator light will flash for 10 seconds after which move out.
9. Temperature management protection: When the temperature of the flashlight is elevated than 50 degrees Celsius, the flashlight will automatically lower the brightness via 50%-30%: If the temperature of the flashlight drops to forty levels Celsius, the brightness of the flashlight will go back to 100%. If the flashlight is used underwater, the temperature of the flashlight could also be less than 40 degrees Celsius. Therefore, it is suggested that you use a flashlight underwater.
10. Applicable to: varied underwater activities, such as snorkeling, picking, fishing, wild fish fishing, etc.
Specification:Name: 3-color diving flashlight COB diving light for underwater 100m photographyColour: BlackLight color: white light/red light/blue lightVoltage: 3: 18000LMColor rendering index: Ra95The bulb varieties are as follows:White light: COB (5000-6500K)Red light: LED (620nm)Blue light: LED (455nm)Charging method: Type-C chargingUse battery: 3*21700 strength batteryBattery capacity: 14400 mAhWorking hours are as follows:5000 lumens: 240 mins of constant work9000 lumens: can paintings consistently for a hundred and eighty minutes18000 lumens: can work constantly for ninety minutes(Note: The verify results have deviations, please consult with the actual situation.)Switch type: push button switchWaterproof depth: beneath 100 metersWaterproof rating: IPX8Maximum range: 300-500mSize: 132*60*60mmNet weight: 605g (without handle weight)
The 2 change light modes are as follows:Switch 1: 4 modes adjustable (red light always on/red mushy flashing/blue gentle constantly on/double-click switch: pink and blue flashing)Switch 2: 3 modes adjustable (white light strong light: 18000lm/ white gentle medium light: 9000lm/ white comfortable low light: 5000lm)Beam angle: 140°
Packing type:1*Diving Flashlight1*Ball Holder1*Handle Holder1*USB Charging Cable1*Wrench2*Screw
Tips:1. The flashlight has a distinct structure and makes use of special devices for installation. Disassembling by yourself can cause harm to the flashlight. Before each dive, please closely verify whether or not the waterproof operate of the flashlight is tight, if it is loose, please tighten it before use. After each dive, please rinse the thread and surface of the flashlight interface and switch with clear water. When the replace is barely stuck, it may be wiped clean with detergent. After the flashlight is dry, you should reapply water resistant lubricant on the flashlight thread interface.