Preces apraksts

• YIDI 10/4/1pcs High Speed Rotation Air Hose Tube Swivel Fitting Quick Fittings Pneumatic Connection Connector 4mm 6mm 8mm 10mm 12mm four 6 eight 10 12 to Male 1/8 1/4 3/8 half 01 02 03 04 Specification: Item No.: NRC Connection Way: One-Touch Quick Push in Connection Type: Hose to Male Thread Design: High Speed Rotation Material: Nitrile Rubber, Plasticn , Metal Fluid Type: Clean Air, Vacuum, No Toxic Gas Applicable Hose: SolfNylon, Polyurethane Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar) Max.Operating Pressure: 15.0 bar(1.5MPa) Negative Pressure:  -750mmhg (10Torr) Ambient And Fluid Temperature: 0~60℃ (140℉) Installation Instructions: Installation Grasp the tubing and slowly push it into the suitable until it comes to stop. The tubing might be locked through the spring gasket. Remove Push the discharge button to open the spring gasket in order that the tubing can be released. Cautions: 1. Cleaning: Clean the piping earlier than connection to take away debris. 2. Tubing Cut: Ensure a perpendicular reduce without scratches at the tubing's outer diameter. 3. Pipe Length: Avoid excessive bending; choose a formal pipe length. 4. Connection: After connecting, pull the tubing gently to check its seal. 5. Release: Push evenly on the release button flange for correct tubing withdrawal. 6. Removal: Avoid rotating the tubing entirely during removal. 7. Assembly: Ensure no particles enters when screwing pipes and fittings together. Safety Instructions: 1. Pressure: Ensure zero stress in the tubing before removal. 2. Spatter Zones: Avoid standard fittings in spatter-producing areas. 3. Monitor Conditions: Stay inside specified strain and temperature ranges. 4. Environment: Avoid corrosive gases, chemicals, and severe conditions. 5. Placement: Avoid areas with heavy vibrations or shocks. 6. Direction: Install tubing within the right one-way direction.  

• 
• 
• 
• 
• 

Atsauksmes