Preces apraksts

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler SealantDescription:1.It has excessive power and quick bonding effect, and is acceptable for immediately attaching various components, LEDs and heat sinks. 2.Good thermal conductivity, strong adhesion, vacuum packaging is not smooth to oxidize and dry, good viscosity, brief drying time. 3.It has good conductivity, large working temperature differ (-60~200°C), and short-term resistance to 300°C. 4.It has short surface curing time, long garage period, non-toxic, solvent-free, and can be safely utilized to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product directly during use, rubbing the outside of the adherend, and directly overlaying it after use, in case of trial again 2) The floor constant pace is expounded to the relative humidity and temperature within the air; the higher the temperature, the quicker the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to scrub the outside of the bonded object before use (such as alcohol), avoid cleansing with detergent, and observe it after the skin is clean. 6.The equipment is sealing and the product is roofed with a vacuum bag to insulate the air and broaden the storage time.Specifications:Thermal properties, solid glue adhesion. Specifications: 5g (single) Melting amount: 0 (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Atsauksmes