Preces apraksts

• Basic parameters:[Size] :59*44mm[Voltage range] DC5V-12V[rated current] ≤ 800mA[Power reverse connection protection] yes[Overcurrent protection] yes[overheat protection] yes Working mode: [1] Normal mode 1: S1 start/stop button, S2 forward/backward button, W2 potentiometer speed management If restrict reversal is required, two limit switches could be related to the P3 pin, and the motor motion shaft is mounted with contacts, in order that the motor will reciprocate within the stroke between the two limit switches[2] Normal mode 2: Click S1 button to begin forwards, S2 backwards, click on any button back to stop W2 potentiometer speed regulation If the restrict quit is required, two restrict switches could be related to the P3 pin, in order that the motor will quit moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked[3] Jog mode: S1 presses the ahead rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the rate If a restrict give up is required, the higher restrict swap could be connected to P3[4] Automatic round-trip mode: S1 begins and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps After starting, the motor mechanically runs again and forth within the number of steps adjusted by way of W1 Add restricted swtich Reference

• 
• 
• 
• 
• 

Atsauksmes