Preces apraksts

• DC 7-24V 200W BLDC 3-Phase Brushless Motor Driver Hallless DC Motor Drive Board Speed Controller Module with Potentiometer Description: BLDC extensive voltage 7-24V high-power small-volume potentiometer speed control Brushless and Hallless controller, single-button edition supports single-button unfastened switching acceleration and deceleration with power-off reminiscence operate potentiometer velocity control version helps PLC 0-5V simulation Signal speedInstructions to be used of potentiometer models:The ordinary power distribution positioner instantly regulates the speed with out exterior management signals It will increase clockwise and decreases counterclockwise also is suitable for exterior PLC 0-5 analog number management Unplug the potentiometer cable, the external 0-5 analog number management sign and ground cord are respectively related to the enter signal terminal of the brushless driver board, as long as two wires are OK Interface Description: 1 U V W part line output is hooked up to the motor2 VCC GND leading power supply (external DC energy supply)Product parameters:Product name: Potentiometer three-phase DC brushless and Hallless driveModel: X30A (potentiometer)Working voltage: 7-24VDrive current: rated 15A plus fan cooling 20AMaximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor) size: size 45MM*width 26MM*height 12MM (excluding wires and sticking out capacitors) Features: ESC is specially evolved and designed for commercial management electrical instruments equivalent to air pumps, water pumps, oil pumps, fans, and so forth that use DC three-phase brushless motors The default is medium timing and long-time high-current operation Jianyijia fan cooling does have overheat protection The deficient exterior warmth dissipation situations of the ESC will mechanically lower the ability when the temperature exceeds a hundred degrees, and the temperature will return to common when it drops to a hundred degrees Precautions: 1 There is no fuse in the power supply circuit at the motherboard Jianyi has added it himself Reverse connection of the nice and detrimental poles of the flexibility supply will trigger permanent damage to some of the chips at the board (even if it does not paintings for 1 second)2 There is motor blockading defense throughout standard operation Because the flexibility and current of the module are large, please do not artificially short-circuit when the module isn't working normally Once the short-circuit may burn the road and the tube might burst, please use the small for the 1st wiring test Current low voltage test, after ok, then cross high current and excessive voltage to work3 Do no longer connect the motor that is for sure inconsistent with the force module voltage, current, or power, to bypass inexplicable "nonsensical" harm Package included: 1 × DC 7-24V 200W BLDC 3-Phase Brushless Motor Driver

• 
• 
• 
• 
• 

Atsauksmes