Preces apraksts

• New EPX10000 Long Range Underground Metal Detector with degausser Eliminate interference alerts Technical parameters 1.Detection intensity range:5-50m 2. Detection distan cerange :100-1000m 3.Rechargeable battery:8 hours of continuous paintings 4.Voltage:12VDC 5.Thtemperaure range:45 to eighty five 6.Humidity:0~95%(non condensing) 7.16 bit processor speed,40MIPS –16MHz 8.32 bit DSS synthesis chip,wave from output 9.Digital frequency synthesisX20PLL,automatic frequency stabilizer,0.1MHz 10.Color LCD display,a resolution of 480 x 320 pixels 11.Net weight:6.6kg,Gross weight:10.5kg 12.Product size:47X37X13.5cm INSTALLATION Scanner control set up Note: Before the day-after-day operation, the battery ought to be totally charged! If you don't payment it, the EPX10000 may move wrong. If irregular , this can be the first time caution that the battery energy is simply too low and needs to be charged. If the battery power is charged an entire night, after that, the battery remains to be no power, you need to replace the battery or charger, or AC energy outlet with out electricity. If the battery is charged,but it is not filled with power,you may wish to interchange the integrated battery. A new fully charged battery can let EPX10000 continue to work about 8 hours. Before turning on the scanner, put the EPX10000 transmitter at the ground, the sensor antenna is connected to the corresponding jacks of the transmitter. When open the transmitter,never plug the sensor, if doing it, it'll trigger damage to the machine. Previously used EPX10000 scan,first make all the essential connections. 1.The sensor is attached to the scanner trying out (+) trying out (-) at the jack, insert the probe of sensor on the planet 2.The transmit antenna sign transmission is fastened on the corresponding interface 3. with the ability key's grew to become "On / Off" knob, activate the power. At this time, in the LCD area, strength indicator,horizontal trmming,longitudinal trmming indicator lights. 4. at this time, EPX10000 is scanning all chosen element . Before beginning the detection process, please let it work 3-5 minutes, that may be briefly defined later. 5.after the top of the operation, make sure to turn off EPX10000. For ease to use,the device requires the use of a smll battery charger is hooked up to the flexibility line charg instrument. Receiver - The rotary activate the end of the receiver panel are the headphone and the antenna jack. When do not use, don't join the antenna rods with the receiver! If the antenna rod is saved with it inserted in the receiver , it will cause the battery to drain. Receiving antenna rod - rod antenna is designed to indicate to the operator that he / she has entered a power transmission line between the sensor and the target. Under standard circumstances, the operator must handheld the antenna rod stably and balanced, as high as your waist, and barely in front of the operator. When handheld the antenna rods, rod antenna must is pointed to the entrance and parallel to one another and separated through 8-18 inches away. Everyone must discover their own perfect distance. It takes trial and error to find. Please remember, the folks who function this device, calm comfortable person will do larger than the demanding stiff! When you input the RF calories line, measured metal,the antenna rod will naturally cross. And the radar scan pointer will give up in one location. When the antenna and radar move and the scanner pause, you see the daybreak of victory would come.SpecificationitemvalueWarranty3 yearsCustomized supportOEM, ODM, OBMPlace of OriginChinaModel Number:EPX10000, EPX10000epth:5-50 meterWarranty:12 MonthsUsage:metal detector for diamondVoltage:9~12VDCCertification:CE. ISORange:100 -1000 meterWeight:10.5kgElements:Copper, Silver, Gold, P.T, TinSize/Unit:47X37X13.5Packing & Delivery

• 
• 
• 
• 
• 

Atsauksmes