Preces apraksts

• HOES-2X Chain Tensioner For Motorized Bicycle,Spring Loaded Chain Tensioner Compatible With 49Cc 66Cc Engine Motorized Bike Chain curler tensioner guarantees proper pressure and alignment of the chain It can forestall the chain from derailing, immoderate wear of the sprocket and extend the lifetime of the chain If the chain isn't always properly tensioned, it will be lost or damaged Eventually the side cover and stator plate could be broken Chain tensioner spring loaded like minded for 49cc 66cc 80cc Engine Motorized Bike Simple installation steps: STEP 1: It is simpler to attach one side of the spring to the curved aspect of the mounting plate, this aspect has 2 small holes (the top gap has greater tension than the bottom hole) STEP 2: In the tensioner Among the five screws/bolts, 2 lock nuts and 2 washers incorporated in the kit, use solely small screws/bolts and lock nuts to connect the tensioner arm to the mounting plate Step 3: Remove the outdated screws from the housing cover, position the stress plate at the housing cover, then use three identical screws to install the tension plate at the top of the housing cover and tighten the hot screws Step 4: Take the largest screw/bolt and upload a washer, then the chain tensioner, then one other washer, after which lock the nut to any of the four vast holes on the tensioner arm (make sure two Washer at the side) Step 5: Connect the spring from the tensioner plate to the tensioner arm Material:Metal colour:black Package Contents: 2 x Chain Tensioner Set Only the above kit content, different products usually are not integrated Note: Light mirrored image and diverse exhibits could cause the color of the object within the picture a little bit varied from the real factor The dimension allowed error is +/- 1-3cm

• 
• 
• 
• 
• 

Atsauksmes