Preces apraksts

• Features: 1: Widely used 2: LCD demonstrate 3: Automatic handbook multi-mode 4: TTL serial verbal exchange 5: The leading functions of the system: automatic, manual, setting, serial port management Product Introduction: This is an operation management module specially for single-axis stepper motors The module has quite a lot of constant operating modes built-in, and the consumer can quickly select the suitable movement track You can save and set the distance/speed/delay/cycle times after power-off It can run independently as a module, or it can be used with different techniques It can be utilized basically commercial management occasions, but cannot be utilized in particular industries akin to medical remedy and fire battling or life-critical fields System Parameters: Model: ZK-SMC01 Step Motor Controller Adapted motor: stepper motor Number of management axes: unmarried axis Motor signal: traditional cathode Power delivery range: DC 5-30V universal Instruction features: streamline and optimize a number of commonly used instructions Acceleration and deceleration control: Yes Input opposite connection protection: Yes Remote communication control: TTL serial port Main functions of the system: automatic, manual, setting, serial port management Speed range: 0~999 laps/minute Number of ahead pulses: 1-9999 pulses Number of opposite pulses: 1-9999 pulses Cycle work times: 1-9999 instances Forward postpone time: zero seconds Reversal delay time: zero seconds Subdivision choice range: 1-128 subdivision Product use environment: -5℃-60℃ (non-condensing) Product List: 1*stepper motor controller 1*plug wire

• 
• 
• 
• 
• 

Atsauksmes