Tu tagad redzi preces, kas tiek piegādātas uz United States. Lai redzētu preces, kas tiek piegādas uz citām valstīm, izvēlies atbilstošu piegādes reģionu.
This link only for 2P 230V 50/60HZ 2NO TOCT1 residence keep AC contactor is especially designed for AC 50Hz or 60Hz circuits with 230V operating voltage in AC-7a usage ,rated operating voltage as much as 230V, rated working recent as much as 25A, Rated operating voltage in AC-7b usage , rated latest to 10A Using in breaking capability below 6kA circuit For distance connect or destroy the circuit Application: for home, apartment, hotel, computerized cut off or connect the flexibility Normal working and installation conditions: 1 Ambient temperature:-5°C to +40°C,the common temperature not more than +35°C in 24 hours 2 Altitude:no more than 2000m 3 Atmospheric conditions: the relative humidity of the set up place ought to be not more than 50% when the maximum temperature is +40°C:if beneath a lower temperature,a increased relative humidity is allowed The month-to-month common minimal temperature within the wettest month shouldn't exceed +25°C and the month-to-month average most relative humidity of this month no more than 90%,the dew on the floor of products caused by temperature exchange ought to be taken into account four Class of pollution: class 2 five Installation condition: category II Application instruction 1 Check whether the contactor is of the same opinion with the scope of utility and the operating situation before set up 2 During the method of installing pull down the motion stopping aspect and put the contactor on the secure orbit then push up the motion-stopping aspect to repair the contactor on the secure orbit keep away from loosening and shedding pull down the motion-stopping factor if you want to eliminate the contactor Caution a) sure the correct mode of connection b) down the binding screw through the connection