Açıklamalar

• *It takes about 30-40mins to boiled 300ml water *Only heating plate，cup not integrated Usage formulation 1 Power: Connect the ability supply, position the cup with liquid in the center of the panel, press the swap position (the switch position is within the electronic show window, in keeping with the necessity to select various gears Note: The mechanical device comes with gravity device, and has automatic popularity function; The mechanical device starts to paintings and heat up when there's a cup, and robotically stops heating and enters the standby state if the cup is taken away 2 This kind of microcrystal furnace has 5 gears and timing functions, the gears are P1 for 1 gear, P2 for two gear, P3 for 3 gear, P4 for 4 gear, and P5 for 5 gear Can be timed for 12 hours, when you need to be in numerous timing, lengthy press the change key for three seconds to change to timing, similar to do not need timing straight click on the switch to close down and reopen three The temperature of every gear is as follows: Gear function container ability temperature P1 Flat glass cup 300ml 40-50℃ P2 Flat glass cup 300ml 50-65℃ P3 Flat glass cup 300ml 65-75℃ P4 Flat glass cup 300ml 75-90℃ P5 Flat glass cup 300ml 90-100℃ 4 Standby shutdown: the cup leaves the heating furnace for approximately 5 minutes when in use If the heating furnace continues to be used, it will be robotically close down five Timed shutdown: If the mechanical device isn't always set to time, the default 8 hours robotically energy off When heating in 6 gear, it's going to automatically swap to 4 tools after heating for about forty mins At this time, in order for you to regulate to five gear heating, then press the swap key

• 
• 
• 
• 
• 

Gözden geçirmek