Açıklamalar

• DIY spot welding pen set up reference.Spot welding needle is manually processed, the length may be about 8mm error, the core diameter is set 2.3-2.4mm error, please pay attention to the acquisition of friends in regards to the length of the problem Thank you.Copper tube inside diameter 8mm most cable gauge: 4awg (about 7.5MM)Wiring requires a little skill, when you should connect simply 7.5mm cable deserve to mushy out the road and then twist into a move slowly into the copper tube (can be reserved for 10-15mm)Spot welding copper core can be put in a 100mm complete replenish minimize into 2 sections to use, the tip is threaded tightening fixed type.The spot welding pen can fit a 100-length welding needle. In addition, it's strongly recommended to apply hydraulic pliers for tightening. Only in this method can the cable and the pen body be in complete and firm contact, with a view to avoid weak touch and impression the welding effect. Hydraulic solving isn't akin to screw fixing.The spot welding pen is comparable to crimson copper and never brass. The electrification price is 3-5 occasions that of brass, and the warmth era is awfully small under excessive current.All joints are hydraulically tightened, as a enormous recent passes through, hydraulic tightening is the best, safe and reliable.Package Included：1setNote:1. Due to manual measurement, please enable an error of 1-3mm.2. As assorted computer systems demonstrate diverse colors, thanks to your understanding, the particular product colour could also be slightly different from the image.

• 
• 
• 
• 
• 

Gözden geçirmek