Açıklamalar

• About Type: M- DG2 is Mechnical Ultrasonic PCB Board DG2 is Digital Ultrasonic PCB Board (we can modify the operating time and temperature by technique of electronic panel) is Digital Ultrasonic PCB Board with degassing function (we can regulate the working time and temperature by means of approach of digital panel) DG2 is Digital Ultrasonic PCB Board with power adjustment(we can modify the working time and temperature and power) DG2 is Digital Ultrasonic PCB Board with strength and degassing adjustment(we can adjust the operating time and temperature and power). Relevant Recommendation The Main Specification of 40KHZ Ultrasonic PCB Generator (Type: DG1 DG2)Powe Supply: AC110V (-15/+10%). 60HZ. 60-120w for the 110V PCB Generator AC 220V (-15/+10%). 60HZ. 60-180w for the 220V PCB GeneratorEnvironment Temperature: -10-40 ℃ Environment Humidity: 35-85% Attentions: 60W PCB can strain 1pcs 60w transducers120W PCB can power 2pcs 60w transducers180W PCB can pressure 3pcs 60w transducersSize of PCB generator （Mechanical version that may no longer join the display panel）103mm*101mm*40mmSize of PCB generator （Digital version which may connect the demonstrate panel） 140mm*105mm*40mmworking time (0-30 mins) and temperature could be adjusted via manner of exhibit panel The demonstrate panel would be chosen per the requirements Some Common Technical Problem of Ultrasonic Generator The ultrasonic generator can&;t strength on beneath no-load condition. After installed, we are able to now not strength on until lay cleaning fluid. Ultrasonic transducer has two lugs advantageous one lay in the center of two pieces of ceramic native one close to lowermetal column. Please are not making unsuitable when wiring. The greater component with screw hole in ceramic transducer which has a function of vibration,can be caught in the backside ofcleaning machine. And please make sure the cleaning machine is safely grounding The ceramic transducer should be pasted in the backside of cleansing mechanical device using transducer specialized glue or use ABglue stick. however the impression is a piece poor, or use epoxy resin with percentage of 10:4. The working circuit board voltage is 600V voltage output to the transducer is 1100 v. Please make sure the cleaningmachine is safely grounding. Please make sure leakage protection replace ,assembled at the power transport in Want to profit more about Ultrasonic cleaning substances Please contact us

• 
• 
• 
• 
• 

Gözden geçirmek