Açıklamalar

• Ice Makers Upper Water Pump Circulation Pump YSP6Y JDVF2 6W 0 1250r/min Water Pump For Manitowoc Ice Machine Reminder: To buy accessories, please provide the equipment nameplate, mechanical device mannequin and equipment pictures; check with customer service before putting an orderName: Ice Maker Pump Upper Water Pump MotorMotor Model:YSP6Y JDVF2Frequency: 50Hz /60HZPower: 6WVoltage: 220V-240VCurrent: zero :1250r/min 1. Different specifications of this collection of goods are powered through varied calories assets resembling single-phase AC 220V/380V, 50/60HZ, etc., and the explicit nameplate label on the product shall prevail. Before use, please test whether the connection to the flexibility delivery is right and reliable, and examine whether or not or not the voltage parameters on the nameplate of the pump are in maintaining with the output voltage parameters of the flexibility supply. The ice-making mechanical device water pump is assembled to the ice-making mechanical device as a component. Fix the water pump in an acceptable function in the course of the establish bracket, and properly and reliably join the water pump strength cord, grounding wire and water pipe, and the water pump could be linked to the water normally. The ice maker works: Do not make different changes to the water pump besides utilizing the mounting bracket, connecting the power supply, and water pipes, corresponding to opening the pump motor casing, replacing the water outlet course of the water pump, etc. Users who do those operations via themselves may injury the motor structure or due to mistaken recovery and meeting impact the use of the product. When installing, preserve the motor a part of the pump as remote from the water surface as possible. Make sure that the cooling fan at the shaft extension has a enough distance from the water surface. When the ice maker leaves the factory, try to regulate the go with the flow ball that controls the water level to the lowest level. Because the water pressure in some places is comparatively high, the impulse of the mechanical device is massive when the water enters, and the flow ball and the water inlet solenoid valve will delay the action. It needs to be averted that the water point of the water tank is simply too excessive and it touches the cooling fan on the water pump water point in the water tank (box) shouldn't be too high, and the acceptable water is to submerge third of the plastic body under the water pump motor height. The overflow port in the sink ought to be as low as probable and big sufficient to ensure that the surplus water could be drained away in time in the use area with excessive water pressure. The set up function of the water pump should be as far away from the water inlet (note) of the ice maker as probable to avoid the water flowing on to the water pump when the water enters. The choice of the installation function of the water pump also needs to pay attention in on that the water splashed from the ice tray (tray) does not splash at the water pump physique when the ice maker is working.

• 
• 
• 
• 
• 

Gözden geçirmek