Açıklamalar

• The TPA3255 is a high-performance Class D strength amplifier with Class D performance and true high-end sound quality The machine facets an advanced incorporated feedback design and proprietary high-speed gate motive force error correction (PurePath Ultra HD) This technology allows the system to preserve ultra-low distortion across the whole audio frequency band while delivering very best sound high quality The system operates in AD mode with a most output of 600WX2/2R or 300WX2/4 ohm and 200WX2/8 ohm load and has a special 2 VRMS analog input interface that supports seamless reference to high-performance DACs (such as TI's PCM5242) In addition to best audio performance, the TPA3255 combines excessive energy efficiency with ultra-low energy point idle losses (less than 2) This is achieved with 85mR MOSFETs and an optimized gate motive force scheme This answer can vastly minimize idle losses in comparison with standard discrete implementations 1 Using 2 American TI-TPA3255 energy amplifier modules, the output strength separation is much better than that of a unmarried chip 2 The front-end differential enter circuit adopts enhance technology, which makes the listening ride extra dynamic than the reputable unmarried 12V line three Fully shielded, low-loss sealed inductors, imported filter capacitors, no stress at 55V Output power: 600W+600W/2 ohms 315W+315W/4 ohms 200W+200W/8 ohms Frequency response: 20HZ-30KHZ THD+N: 0% at 1W/4; Less than 0% at clipping Power supply voltage: fantastic 19V to effective 52V Note:The greater the enter energy supply, the larger the power delivery recent and the greater the output The energy test is measured at 50V energy supply If you switch to a 24V 36 low voltage strength supply, the output energy might be decreased accordingly Colour:As Shown Material:abs Size:PCB Size:138x128MM Package Contents: 1 * Digital power amplifier Only the above package content, different products aren't integrated Note: Light reflection and different exhibits can cause the colour of the object in the picture a bit of different from the real factor The dimension allowed error is +/- 1-3cm

• 
• 
• 
• 
• 

Gözden geçirmek