Açıklamalar

• The D1000 and D900 Bluetooth strength amplifier boards either 2 channel, with an output strength of 50W + 50W + 100W Notably, the D1000 energy amplifier board comes with the added functionality of being able to connect to a battery, offering greater flexibility in utilization situations In contrast, the D100W, D20, and D10 Bluetooth strength amplifier boards are all 1 channel instruments Specifically, the D100W has an output strength starting from 100W to 300W, making it suitable for functions that require relatively excessive strength output The D20 affords an output strength between 60W and 200W, putting a balance between power and flexibility The D10, on the different hand, has an output energy of 30W to 120W, which is extra appropriate for setups with decrease strength demands D1000 There could be adequate output power with adequate audio input and enough supply voltage/current! The larger the ability delivery voltage the higher the output power, the decrease the speaker impedance the higher the output power! Please ensure that the ability of the tailored energy delivery is bigger than the actual operating energy of the amplifier! Features: ● With over-voltage, under-voltage, overheating, circuit preserving ● For domestic entertainment, parties, performances, auditory-visual studios and other position that require solid bass effects Also appropriate for out of doors activity, traveling and different occasions that require transportable auditory Specificities: Bluetooth Version: five (unobstructed 10 meters) Input Sensitivity: 500mV Input Method: Bluetooth+AUX+MIFM+USB+TF Card Channel: 2 Amplifier Chip: Original imported IC Power Supply: DC 15~18V/5A or above (rechargeable) Suitable for Speakers: 20~100W, 4~8 ohms Output Power: Left and Right Channel ≤ 50w Subwoofer ≤ 100W Protection Mechanism: Over-voltage, under-voltage, over-temperature, DC detection, short-circuit defense Heatsink Size: 50*25*10(mm) Product Size: 260*85*75(mm) D900 Sufficient output power will solely be available if the audio input is satisfactory and the provision voltage/current is adequate The larger the ability supply voltage, the better the output power, the lower the speaker impedance, the better the output power! Please be sure that the power of the ability delivery is greater than the particular operating energy of the amplifier! Features: ● Microphone squawk suppression operate ● Microphone volume and grasp quantity are both independently adjustable ● High-end aluminum alloy brushed panel ● Analog wireless microphone board interface ● Support bass effect adjustment Specifications: Color: Gold Material: Metal+Plastic Bluetooth version: 5 (unobstructed, 10 meters) Channels: 2 Input sensitivity: 500mV Applicable speakers: 20-100W, 4-8 ohms Output power: left and appropriate channels Less than 50w, subwoofer Less than 100W Applicable energy supply: DC 12-24V/5A or above (the greater the voltage, the greater the output power) Protection mechanism: overvoltage, undervoltage, overheating, AC/DC detection, short circuit protection Multiple inputs: Bluetooth/AUX/USB/TF card/K song/reverberation adjustment Microphone volume and grasp volume are independently adjustable Plug Type:US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the United States, the Philippines and so on/EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on Voltage:AC110V/AC220V D100W How to apply ? Different from 2 channel amplifier which use Left and Right identical speakers, this 1 mono amplifier board, its 2 output interface frequency are different, the high-frequency interface is attached to the Treble Speaker, and the low-frequency interface is hooked up to the Bass Speaker, so as to achieve the stereo tone reverberation impact TIPS: Don&;t connect usual 2 speakers, in any other case the facet connected to the bass will feel weak, cuz regular speakers can not achieve bass impact Features: ● Support reading and play the MP3 songs in TF-card and U-disk ● Support autonomous adjustment of Treble, Bass and Master volume ● With AUX Audio input, can be connected to PC, Phone, TV or DVD ● Dual Mic input, adjustable reverb, with Bluetooth and FM radio ● Support Wired Mic and Wireless Microphone Board(not included) Descriptions: Model: D100W Bluetooth Version: five Audio Channel: 1 Rated impedance: 4-8Ω Rated Power: 100W Power Range: 100-300W Distortion: 0% S/N Rate: 92db Battery of Remote: CR2025 x1(Not Included!) Feature: FM Radio / Treble / Bass Voltage: AC 220V, DC 12V~24V Input: Bluetooth/3 AUX/U-Disk/TF/6 MIC Note: 1 Support AC 210-230V or DC 12V-24V (Warning: Pls choose only one power supply method) 2 If connect DC Power, the present should over 3A three The mic port no longer help guitar for higher effect, phantom strength is suggested 4 DIY product, the circuit board at the back may be hidden, pls focus your consideration on its sound impact five The Power button just for AC energy mode Not valid in DC mode D20 Features: ● High Power, maximum help 200W, carry better trip ● Can join the Treble and Bass on the identical time ● Can Play Music from TF card, U disk, Bluetooth ● Small size, can be put in anywhere you like ● Full function Remote, Use the numeric keys to manage instantly Specification: Model: D20 Bluetooth: V5 Audio Channel: 1 Rated impedance: 4 ohm Rated Power: 80W Power Range: 60-200W (Deponds on Voltage) Input: Bluetooth/Lotus/U-Disk/TF/MIC Battery of Remote: CR2025 x1(Not Included!) Feature: FM Radio / HIFI Voltage: AC 110/220V, DC 12V/24V Matching Speaker: Impedance: 4-6 ohm Rated Power: Less than 60W ✦ Mode Button = Long Press Play Button Note: 1 Support AC 110/220V or DC 12V/24V Warning: Pls select only one power supply formulation 2 If join DC Power, the present must over 3A 3 The mic port not support guitar for better effect, phantom power is suggested four DIY product, the circuit board on the again could be hidden, pls concentration your consideration on its sound impact 5 The Power button just for AC strength mode Not valid in DC mode D10 Feature: ● Support reading MP3 songs in TF-card / U-disk ● Independent adjustment of Treble, Bass and Master quantity ● Built-in Bluetooth Receiver and FM Radio Function ● With AUX input port, could be linked to the PC/Phone/CD ● Dual microphone input, adjustable reverb ● Support Voltage AC 110V/ 220V or DC 12V/ 24V How to Connect Bluetooth ? 1 Press &;&;MODE&;&; button to switch it to Bluetooth popularity 2 Open telephone Bluetooth, search the Bluetooth machine and connect 3 You can use it after pairing efficiently Description: Model: D10 Bluetooth: V5 Audio Channel: 1 Feature: FM Radio / Treble / Bass Voltage: AC 110/220V, DC 12V/24V Power: 30-120W (Deponds on Voltage) Input: Bluetooth/Lotus/U-Disk/TF/MIC How to use Radio ? 1 Hang up the Radio Antenna 2 Press &;&;MODE&;&; button to switch it to the radio state three Press the &;&;Play&;&; button to search the whole channel and save 4 Press the previous / subsequent song to change to apply TIPS: This is not reputable radio, no nice effect, pls understand! TIPS: 1 Support AC 110V / 220V, automatic adaptation 2 If hook up with DC 12V-24V, the Current needs greater than 3A Warning: Pls select just one connection formulation !!! Notice: Please flip off the small grasp volume earlier than test, then increase the amount slowly after power-on -> If the sound is intermittent or hoarse and distorted during growing the volume, it means the speaker and amplifier are usually not matched Please use small sound or replace an appropriate one

• 
• 
• 
• 
• 

Gözden geçirmek