Açıklamalar

• NOTICE: This is a 3D printer DIY kit, it need to assemble by yourself. This item have 12 months warranty. Option With E4 Hotend Z9V5Pro with E4 Hotend With M4 Hotend Z9V5Pro with M4 Hotend with E4 M4 WiFi Z9V5Pro with M4 Hotend and E4 Hotend and WiFi Module With BMG M4 Z9V5Pro with Dual Gear Extruder and M4 Hotend With BMG E4 M4 WiFi Z9V5Pro with Dual Gear Extruder, E4 Hotend and M4 Hotend and WiFi Module Note 1: E4 hotend is a 4-IN-1-OUT Non-mix color hotend and M4 hotend is a 4_IN-1-OUT mix color hotend, about what's different on them, please read the guide at the end of item description. Note 2: The goods may be delivered with 2 packages, please pay attention to the information we send in Aliexpress. Features Equiped with 4 extruders and 4-IN-1-OUT multi color hotend (1), ability to print multi colors 3D prints. Support to paint color to a 3d model file and printed into multi color(2). Automatic gradient color printing(3). 95% pre-assembled, fast installation(4). Ultra silent, working noise is less than 58db(5). High performance 32-bit control board. One button to switch mutil language menu (EN/ES/PT/FR/RU). Power loss recovery (6). Bed auto leveling. Filament run out detection. Auto shutdown after print finished (7). Firmware open source . (1) Mixing color and Non-mixed color hot ends can be choosed, which have different performance. (2) Achieve this function in slicing software. (3) Only works with a mixing color hotend. (4) Calculate based on the actual installation time ratio when all components are not installed. (5) Measured at 50cm away from the machine. (6) The actual printed item cannot exceed 80% of the maximus build size of the machine. (7) The machine enter sleep mode after automatic shutdown, and the standby power of the machine is less than 5W. Optional Upgrades PEI Hotbed Sticker: Never warp& Never rust, Flexible, Removable, stick to magnets very well. Linear rail upgrade kit: Improve printing accuracy and service life Enclosure cover: Required when printing materials such as ABS/PC Direct drive extruder: Support to print flexible (TPU) filament. High flow rate and high temperature hotend: Support speedy printing. Automatica repeat printing module: Automatic remove the printed object from the platform and continue printing the next one. Laser engrave engine: Turn your 3D printer into a simple laser engraving machine. Note: If you are interesting to upgrade these features, please see the bottom of the item description to buy. FAQ Q: Does it need a color prime tower when printing multi color? A: Yes, it is. Q: I only have a single color STL file, can I print it to multi color? A: Yes, you can painting color to any STL files when slicing and then print it to multi color. Q: What's different between E4 hotend and M4 hotend. A: Please refer to the below picture.

• 

Gözden geçirmek