Beschreibung

• Prusa MK3, MMU2.0 five-color printing module multi-color 3D printer Kit Main features: MMU 2.0: The new design is automatically refueled by the cutting blade, and only one extruder can print five materials at the same time (not multiple in and out) Five kinds of wires are printed at the same time: The second generation multi-material extrusion upgrade kit supports five materials for simultaneous loading and printing. In addition to traditional materials such as ABS, PETG and PLA, MMU 2.0 also supports soluble support materials such as BVOH and PVA Short-range extruder: With the improved short-range extrusion mechanism, it is now possible to load wire more reliably and reduce the amount of material F.I.N.D.A breaking detection sensor: Squeeze the stainless steel ball through the wire to make F.I.N.D.A measure and judge whether it is broken. Smarter wipes: The new Slic3r PE fully supports the MMU 2.0 upgrade kit, including a new intelligent wiper tower that hides the rubbing process in the fill and body, saving printing time and consumables New multi-color print control panel: New original imported control board, and the motherboard firmware can be updated synchronously on Prusa's official website. At the same time MK3 printer body support: Power failure Broken material detection Elastic hot bed MK52 (just remove the printing platform after printing, gently bend, you can easily pick up the pieces) Hot bed automatic leveling Magnetic hot bed without clip fixing Limit intelligent detection without limit switch Can be equipped with Raspberry Pi to support WiFi phone control Complete set of graphic tutorials for easy assembly Print maximum forming volume 250*210*210mm Printing speed: 200mm/s Layer thickness: 0.05-0.35mm Nozzle diameter 0.4mm Use 1.75mm wire diameter consumables

• 
• 
• 
• 
• 

Rückmeldung