Preces apraksts

• Metric 110Pcs Tap and Die Set High Speed Steel Titanium Tap and Die Combination Set For Cutting External & Internal Threads Outer box Black/Red/Blue,Random shipments coloration of outer field Precision machined, Tungsten metallic faucets and dies Dies are break up to assist facilitate the advantageous adjustment of core diameter Set includes Metric coarse and superb sizes set entails two sliding jaw form tap wrenches and T-Bar sort faucet wrench together with two steel die holder with knurled screws faucets and dies contained in this set are precision instruments machined, Tungsten steel taps and dies Dies are split to help facilitate the superb adjustment of core diameter Set includes Metric coarse and high-quality sizes set involves two sliding jaw variety tap wrenches and T-Bar kind tap wrench along with two metallic die holder with knurled screws in heavy-duty blow moulded storage case faucets and dies contained on this set are precision tools Taps To cut an inner thread, choose the tap of the desired size, faucet wrench, right drill length or gap size, and lubricating or chopping oil proper hole size is very important within the formation of good threads An outsized gap leads to decreased thread height, an undersized gap will overload the tap and trigger undue breakage Refer to the required drill size completely marked at the shand of each tap and drill the hole to desired depth faucet via the square within the faucet wrench and begin threads through turning clockwise Great care should be taken to begin the faucet sq. to the hole As the tap is turned it bites into the metal and leads into the outlet After the tap has been started, steel chips that flow into the flute areas must be damaged to alleviate stress on the faucet Dies o lower an external thread, resembling on a bolt, choose the correct die for the rod being threaded, die stock, and lubricating or chopping oil Size of the rod or bolt, is of great significance It should be no larger than the desired thread, and preferably 005" to 010" undersized Oversized work may damage the die and could make turning very demanding undersized work is less complicated to string and furnishes enough thread peak for regular use securing the section being threaded, insert the die into the die inventory and run the screw snugly into one of the recesses within the exterior surface of the die (The recess and slot sample of dies allows use with a wide range of die stocks) 35 x plug faucets M2 x 0, M3 x 0, M4 x 0, M5 x 0, M6 x 0, M6 x 1, M7 x 0, M7 x 1, M8 x 0, M8 x 1, M8 x 1, M9 x 0, M9 x 1, M9 x 1, M10 x 0, M10 x 1, M10 x 1, M10 x 1, M11 x 0, M11 x 1, M11 x 1, M11 x 1, M12 x 0, M12 x 1, M12 x 1, M12 x 1, M12 x 1, M14 x 1, M14 x 1, M14 x 1, M14 x 2, M16 x 1, M16 x 1, M16 x 2, M18 x 1 35 x taper taps: M2 x 0, M3 x 0,M4 x 0,M5 x 0, M6 x 0, M6 x 1, M7 x 0, M7 x 1, M8 x 0, M8 x 1, M8 x 1, M9 x 0, M9 x 1, M9 x 1, M10 x 0, M10 x 1, M10 x 1, M10 x 1, M11 x 0, M11 x 1, M11 x 1, M11 x 1, M12 x 0, M12 x 1, M12 x 1, M12 x 1, M12 x 1, M14 x 1, M14 x 1, M14 x 1, M14 x 2, M16 x 1, M16 x 1, M16 x 2, M18 x 1 35 x dies M2 x 0, M3 x 0, M4 x 0, M5 x 0, M6 x 0, M6 x 1, M7 x 0, M7 x 1, M8 x 0, M8 x 1, M8 x 1, M9 x 0, M9 x 1, M9 x 1, M10 x 0, M10 x 1, M10 x 1, M10 x 1, M11 x 0, M11 x 1, M11 x 1, M11 x 1, M12 x 0, M12 x 1, M12 x 1, M12 x 1, M12 x 1, M14 x 1, M14 x 1, M14 x 1, M14 x 2, M16 x 1, M16 x 1, M16 x 2, M18 x 1 Specifications Material:Tungsten Steel Sub-Type:ENGINEERING TAP AND DIE SET Tap holder:M3 - M12 (1/16" - 1/2") Tap holder:M6 - M20 (1/4" - 3/4") Tap wrench:T bar Die holder:Total size 200mm (1" diameter bore) Die holder:Total length 270mm (1 1/2" diameter bore) taper taps:35pcs plug taps:35pcs dies:35pcs Package Content 2 x tap holders (different size) 1 x T- bar tap wrench 2 x Die holder (different size) 35 x taper faucets 35 x plug faucets 35 x dies 1 x Portable Storage Case

• 
• 
• 
• 
• 

Atsauksmes