Opisy

• Wait... We know what you're thinking..."WHAT SHOULD I USE THESE FOR?"Well, we have something for youYou may additionally want to use adhesion promoter with some nice tapeswith hyperlinks beneath :)ADHESION PROMOTER + TAPES = BEST BUDDIES EVERWhy use primer?- Prime guarantees higher adhesion of paint to the surface, broaden durability, and give additional protection for the material being painted.- It permits things to stick much better than using every other adhesive supplies alone.Features:- The preliminary viscosity is awfully strong, and it will reach the destruction level in a short time.- This product is appropriate for: rain shield, handle, door bowl, window trim, anti-collision tape, lampshade, gasoline tank cover, rear shield, middle mesh trim, welcome pedal, EPDM / TPE rubber seal Other vehicle amendment parts.Tips for using:- Surface Preparation: The bonding surface ought to be relatively clear and dry. Contaminated surfaces must be wiped clean with a 50/50 Isopropyl Alcohol and water mixture.- Make yes the primed floor remains free from contaminants before you apply the tape.-This isn't always glue and can't be used as glue alone. Adhesion promoters are used to raised bond the tape. You deserve to observe it on tape or any adhesive.So Need to be used along with double-sided tape for better use.The leading aim of the primer is to reinforce the adhesive effect of films, tape or different self-adhesive materials. Primer - -an indispensable assistant on the vehicle wrapping vinyl film! Without it, no respectable paintings done.Clean-up:Primer can eradicate residual glue. Need to wash vigorously.Primer Instructions:Step 1: Prepare the primer.Step 2: Apply the primer to a clean, dry floor (simply ''paint'' the spot)Step 3: Allow the primer to completely dry for 5 minutes.Step 4: Apply the tape productStep 5: Allow 72 hours of stay time earlier than us.(80% Increase Viscosity)Tapes+ primer Time:After application, the bond power increases as the adhesive flows onto the surface. At room temperature approximately 50% of ultimate bond strength might be finished after 20 minutes, 90% after 24 hoursand 100 percent after seventy two hours.

• 
• 
• 

Recenzja