LatTIce iCE40UP5k FPGA is used for core instruments
The 5280 logic unit (4-LUT+CARRY+FF) has an identical FPGA resources as our LatTIce edition and less good judgment resources than the Altera version;
100 and twenty Kbit dual port RAM
1 Mbit (128 KByte) single port RAM, which exceeds the inner reminiscence technique of the FPGA utilized by us, is explanation why it'll help CNN;
PLL, 2 x SPI, 2 x I2C hardened IPs. Two inside oscillators (10 kHz and forty eight MHz) tremendously simplify the design. Eight DSP multiplier blocks are used for sign processing, corresponding to voice synthesis and ; Very low energy intake for battery powered functions
3 x 24 mA drives and three x not easy IP PWM (can instantly force RGB LED lighting and small recent motors)
Enough, quick satisfactory memory
128 Mbit (16 MB) SPI double records rate (QSPI-DDR) flash
For example, video motion could be transmitted to LED lattice
A lot of I/O (actually, there are few pins of UP5K FPGA, but they're enough)
3 pins for RGB LED
2 for board
One UART port, RX pin and TX pin can be accessed by means of method of digital USB serial port
One key
Two Pmod connectors (total 16x pins)
There is a Pmod (8 x pins) that may be damaged off fashioned LED lighting
three keys
Sufficient assets to help the CPU smooth core!
picorv32
pico soc
RISC-V and other smooth cores
On board FPGA programmer and USB to serial adapter
Compatible with IceStorm iceprog system
Simple, no stress required to hook up with the host
Pmod connector and Pmod module
This board has 3 styles of normal Pmod connectors, that are expanded very much - you should utilize many ready-made Pmod modules within the market, otherwise you can design your individual dedicated Pmod modules, for example, they evolved seven phase electronic tube Pmod, DIP switch Pmod, LED visual display unit force Pmod and an -compatible output Pmod.
Colour:blue
Material:PCB+electronic elements Package Contents:
1 x FPGA advancement board Only the above equipment content, diversified merchandise usually are not included.
Note: Light reflection and sundry reveals could cause the colour of the object in the picture considerably varied from the genuine thing. The size allowed error is +/- 1-3cm.