Opisy

• Product parameters DC-DC 12V(9-13V) TO thirteen 1-5A Instructions ApplicationsWide vary of applications: Industrial automation management Research equipment, LED lighting, industrial management equipment, car equipment, energy equipment, instrumentation equipment, clinical equipment, refrigeration empty purifier,Electronic refrigerator, liquid crystal display, LED display, audiovisual product, security imported pc chassis, electronic products and assorted devices and other fields。User&;s ManualThe 12V(9-13V) battery voltage is converted to a thirteen DC voltage (Uncertain installations, please touch our corporation before installation)！！！Long-term use can't be entirely loaded, please cut power or prefer extra powerful products, ideally suited 50% of maximum strength Make sure that each one the polarity is correct, and the anti-negative conversion converter (except for input tape opposite protection)2 Make yes the cable is natural copper wire, the input and output cables cannot exceed 2 meters, and the output will be eliminated by way of greater than 2 meters The voltage will be reflected If the line is extended, it is best to develop the road diameter in line with the corresponding multiple The cable must be related to the thread, please check with the twine diameter length and securely connected The input terminal is needed to connect the fuse or air switch, and also you should select the corresponding fuse or switch] (except the enter belt fuse)5 Make sure the battery capacity is giant adequate to supply sufficient calories If the enter calories isn't enough, the voltage might be diminished Make yes the set up environment is easily ventilated, so as to not protect over temperature protection, limit latest output7 Cannot join on to solar panels or wind wind turbines8 Non-charged units cannot be charged battery and lithium batteries9 When connecting the enter verify with DC energy supply, the input should not exceed the voltage fluctuate of the battery, and no overvoltage protection (can be customized) step (four traces or 4 / 5 terminals)1 Turn off all strength materials and cargo switches2 Before the wiring, listen in on all positive and unfavorable poles3 Connection (OUTPUT-) to load negative, connection (OUTPUT +) to load positive4 Connect the fuse or air swap to (Input +) input the high-quality cable, then join (Input +) to the battery positive, connect (Input-) to the battery adverse electrode5 Make sure all tremendous and adverse connections are appropriate (do not reverse, opposite the burnback converter), activate the ability and cargo switch(Note: If the ACC port is connected, connect the ACC to the ignition switch: If you should not have to apply the ACC function, join the ACC to the (Input +) battery "positive)troubleshooting1 Output no voltage, please test if all traces are linked firm, the battery is enough, whether or not the fuse is burning Output the voltage, check if the burden beginning latest is just too large, the ventilation is good, whether the outer casing is heated, whether the cable and the thread are chosen and installed, whether or not it's lower than 2 meters, and the enter battery has adequate calories

• 
• 
• 
• 

Recenzja