Opisy

• Professional Tree Climbing Arborist Retriever Ball Rope Guide Ring Friction Saver Tool Outdoor Gardening Equipment Specification: Material: Plastic Diameter: 27mm/1 Colour: Black Weight: 15g Scope of application: tree climbing Use steps: Step 1: Tie the rope-throwing bag to the tow rope, pass it through the huge ring, and throw it over the treetops Step 2: After unlocking the rope throwing bag, use the tow rope to pass through the small loop and then tie the rope thrower again and pull down the rope Step 3: Pull down the rope Throwing the rope bag will pressure the small ring up Step 4: The rope-throwing bag drives the small loop in the course of the treetops and the tree-climbing belt has been hung on the treetops Put down the rope-throwing bag at this time Step 5: Untie the rope-throwing bag, tie the foremost rope with a tow rope as shown in the figure, after which pull it up, allowing the most important rope to go through the massive and small loops Step 6: After the foremost rope passes throughout the huge and small loops, fix one finish of the rope, and you can operate on the rope at this time Step 7: After use, tie the mountaineering ball and the traction rope with the key rope, and pull down the most important rope Step 8: The tree climbing ball will go through the large ring and then deliver down the sling ring Step 9: Pull down the major rope with one hand and hold the traction rope with the opposite hand to stop the sling loop from falling down and hurting humans because of gravity Step 10: Remove the sling ring and tree mountain climbing ball Step 11: Pull down the traction rope and place it within the rope body The operation is whole Note: Due to different display screen and light effect, the actual coloration of the object might be barely diversified from the colour showed at the images Thank you! Please allow 1-2cm measuring deviation thanks to handbook measurement 1 X Balls Rope Guide Ring

• 
• 
• 
• 
• 

Recenzja