AC Triac Rotary Panel Dimmer Model No.: KSRotary dimming/Leading edge or trailing edge/Min brightness settable/Wireless distant contro
Features● Rotary panel AC phase-cut dimmer, 1 channel output.
● To dim and switch single shade dimmable LED lamps, typical incandescent and halogen lights.
● Rotate knob to change brightness, assist push and prolonged push operation.
● Leading edge dimming or trailing edge dimming set via means of dip switch.
● Min brightness can be set by method of key.
● Light on/off fade time 3s selectable.
● Compatibility with RF 2 dimming remote control.
● Over-heat / Over-load protection, recuperate routinely
Main parameters:
●Input voltage: 100-240VDC●Output voltage: 100-240VDC●Output current: MAX 1●Output power: 150-360W●Dimming type: Rotary panel AC phase-cut dimming●Input sign :Rotary knob + RF 2
What kind of lamps is it well matched with?
● Dimmable LED lamps, most load 200W @ 220V, 100W @ 110V, due to the variety of LED lamp designs, maximum variety of LED lamps
It also depends on the ability ingredient result when linked to the attenuator.
● Triac dimmable LED drivers, most load 200W @ 220V, 100W @ 110V, the maximum allowable number of drivers is 200W divided by way of the nameplate strength ranking of the driver, and make sure the surge recent is no greater than 2 occasions 65A.
● Incandescent lighting and HV halogen lamps, maximum load 400W @ 220V, 200W @ 110V
Light on/off fade timeLong press tournament key 5s, then quick press match key 3 times, the sunshine on/off time might be set to 3s, the indicator gentle blink thrice press tournament key 10s, fix manufacturing facility default parameter, the light on/off time additionally repair to 0
Safety information1. Read all directions heavily earlier than you begin this installation.
2. When installing battery, hear in at the battery nice and negative polarity very long time without the remote control, eliminate the battery remote distance turns into smaller and insensitive, update the battery.
3. If no reaction from the receiver, please re-match the remote.
4. Gently handle remote, watch out for falling.
5. For indoor and dry location use only.