Feature:This adhesion promoter is available in an easy-to-use sponge applicator packet.The liquid contents of the packet must be completely used as quickly as probable after opening.Apply promoter only to the areas that will be fully lined with tape.The primer must be dry earlier than applying tape.For best results, follow tape straight after primer utility or no more than one hour after primer application.Be yes the primed surfaces stays free from contaminants ahead of tape application.Increases bonding strength of any double sided tape.Tips for using1: Surface Preparation: The bonding surface should be comparatively clear and dry. 2: THIS IS NOT A GLUE AND CANNOT BE USED SOLELY AS A GLUE. THE ADHESION PROMOTER IS FOR BETTER ADHESION OF YOUR TAPE. YOU NEED TO APPLY IT ON A TAPE OR ANYTHING ADHESIVE.3:Clean-up:Contaminated surfaces should be cleanedwith a 50/50 Isopropyl Alcohol and water mixture.Vigorous scrubbing may be required.Application: - Leave the primer ninety four for a couple of minutes before making use of tape. This is usually completed in five minutes at normal temperature. - Avoid any contacts with eyes and skin. - This product is flawed for kids.Type: PrimerPrimer is for plastic materials. For use with acrylic.Quantity:50 PcsPackage include:50 Pcs x Adhesion Promoters.