Customer Reviews
Candle Making Set 1
Package contains:
1 400ml wax melting pot
2 800ml melted wax outer pot
three 600ml measuring cup
four Electronic thermometer (excluding battery)
5 19cm mixing spoon
Candle Making Set 1
Package contains:
1 400ml wax melting pot
2 800ml melted wax outer pot
Electronic thermometer
(excluding battery)
600ml measuring cup
Candle Making Kit Instruction Manual
Thank you for getting our Candle Making Kit This handbook will instruction manual you thru the instruments included in your equipment and supply directions on find out how to use them to make your personal candles
Kit Contents:
• Wax Melting Pot
• Double Boiler Pot
• Thermometer
• Stirring Spoon
• Measuring Cup
Instructions:
1 Setting Up Your Workspace:
• Choose a clean, heat-resistant surface to work on
• Keep your area well-ventilated and unfastened from any flammable materials
• Have a first aid package nearby in case of accidental burns
2 Preparing the Wax:
• Place the wax that you&;ll be melting into the Wax Melting Pot
• Fill your Double Boiler Pot with water as much as the midway level and position it at the range
• Position the Wax Melting Pot inside the Double Boiler Pot so that it floats at the water with out touching the lowest
• Turn the range to medium heat and await the water to start simmering
3 Melting the Wax:
• As the water heats up, the wax in the Wax Melting Pot will begin to melt
• Use the Stirring Spoon to softly stir the wax occasionally, making certain even melting
• Monitor the temperature of the wax using the Thermometer Most waxes should be melted between 160°F to 180°F (71°C to 82°C)
four Adding Fragrances and Colors (Optional):
• Once the wax is solely melted, you may add dyes or perfume oils if desired
• Stir thoroughly with the Stirring Spoon to frivolously distribute the components
• Consult the packaging of your dye or perfume for particular temperature recommendations
5 Preparing the Mold:
• While the wax is melting, practice your candle mould by securing the wick within the center
• Use a wick holder or a pencil to maintain the wick upright and targeted as the wax cools later
6 Pouring the Wax:
• When the wax has reached the right temperature and all additives have been combined in, carefully get rid of the Wax Melting Pot from the Double Boiler
• Slowly pour the wax into the mold, utilizing the Measuring Cup if obligatory for precision
• Let the wax cool undisturbed till it&;s permanently solidified
7 Finishing Touches:
• Once the wax is set, trim the wick to about 1/4 inch above the wax floor
• If necessary, use a heat gun or hairdryer to comfortable out the skin of the candle
eight Cleaning Up:
• After use, clear your instruments with hot soapy water
• Be sure to eradicate any remaining wax whereas it&;s still warm, as it&;s a lot harder to scrub once cooled
Safety Precautions:
• Never leave melting wax unattended
• Keep the thermometer and other instruments far from young people
• Use heat-resistant gloves when handling hot equipment
Enjoy developing your custom candles, and make sure you always stick to security guidelines through the task