说明

• Note：DO NOT CONNECT THE SECOND OUTPUT TO THE GRID,IT WILL DAMANGE YOUR INVERTER This Inverter only have one MPPT, and the dual PV enter is to facilitate photo voltaic panel wiring and reduce the use of combiner field Dual AC output: beneath typical conditions, the major circuit and secondary circuit outputs are used normally When there isn't any PV and mains strength enter and the battery voltage is simply too low, the main circuit is disconnected and only the secondary circuit output is retained to save strength Otherwise, you don&;t deserve to connect to the second output of 48VDC solar energy inverter：Daul PV In-Put and Second Output160A 10 on/off Grid Inverter1 sine wave photo voltaic inverter（on/off Grid）2 running without battery3 strength aspect 1 PV enter voltage range(90~500VDC)5&GPRS accessible for IOS and Android6 anti-dusk equipment for harsh environment7 160A（for 10）MPPT photo voltaic charge8 battery price design to optimize battery life9 recovery to factory Settings10 output11 Lithium battery automatic activation12 buttom Basic System Architecture: The following illustration shows the basic software for this inverter/charger It also involves the following instruments to have an entire running system:1 or Utility modules Consult with your system integrator for other possible formulation architectures reckoning on your requirements This inverter can energy all kinds of home equipment in-home or office environment, adding motor-type home equipment comparable to tube lights, fans, refrigerators, and air conditioners sine Wave Inverter:10200KW Pure sine Wave Inverter is a brand new all-in-one hybrid photo voltaic inverter charger, Support dual PV input, dual MPPT voltage tracking lingthing for different working mode(Purple-PV Mode;Red-Battery Mode;Blue-Utility Mode)Four modes could be favor when charging battery: Utility first: Utility will price battery as first precedence source, then Solar Power first: Solar will charge battery as first precedence source, then Utility Power and Utility(default): Solar Power and Utility energy will charge battery at the identical time Solar: Solar Energy because the only supply payment battery Output modes could be choose：Utility first (default):Utility will provide power to theloads as first priority, Then Solar Power, battery PowerSolar first: Solar calories gives strength to the hundreds as first precedence If solar energy is not enough to energy all linked loads, utility will delivery energy to the hundreds at the identical time，then battery strength Priority: Solar energy offers energy tothe lots as first priority If solar power is not enough to energy all related loads, battery energy will supply energy to the hundreds on the identical time features:Built-in BMS operate Lithium Battery Activation， has a reactivation feature to awaken a napping lithium battery The small charge recent to switch on the security circuit and if an accurate cell voltage would be reached, it starts a standard payment AC output, one for the main load (UPS function), one for the conventional loadWIDE RANGE OF USES：MPPT Inverter Charger Pure sine Wave 10200W for RV Camping Boat Home Emergency ect Can be accessed to quite a lot of family and workplace loads, including Oven, rice cooker, lamps, televisions, followers and different AC loads（Be careful not to install it close to the bedroom, the fan will make a valid when the inverter is working Avoid affecting your rest Parameters: INVERTER MODEL eight 10 Output Voltage Waveform Pure Sine Wave Output Voltage Regulation 230Vac±5% Output Frequency 50Hz Peak Efficiency 93% Nominal DC Input Voltage 48Vdc High DC Recovery Voltage 62Vdc High DC Cut-off Voltage 63Vdc No Load Power Consumption 70W 75W Two Load Output Power Full Load 8200W 10200W Maximum Main Load 8200W 10200W Maximum Second Load(battery model) 2733W 3400W Main Load Cut Off Voltage 44VDC Main Load Return Voltage 48VDC Utility Charging Mode AC Charging Current(Max) 140Amp 160Amp Floating Charging Voltage 54Vdc MPPT Solar Charging Mode Max Array Power 8200W 10200W Nominal PV Voltage 360Vdc PV Array MPPT Voltage Range 90Vdc~500Vdc Max Array Open Circuit Voltage 500Vdc Max Charging Current (AC charger plus photo voltaic charger) 160Amp 160Amp Grid-Tie Operation Nominal Output Voltage 220/230/240VAC Feed-in Grid Voltage Range 195~253VAC Feed-in Grid Frequency Range 49~51±1Hz/59~61±1Hz Nominal Output Current 35 forty four Power Factor Range >0 Maximum Conversion Efficiency (DC/AC) 98% General Specifications Safety Certification CE Operating Temperature Range -10℃ to 50℃ Storage temperature -15C~60℃ Humidity 5%to 95% Relative Humidity(Non-condensing) Dimension(D*W*H),mm 537*390*130 Net Weight,kg 14 14

• 
• 
• 
• 
• 

审核