Description

• HPA Air Tank Cylinder Regulator New Design Dual Gauges Air Valve Fill Station Adjustable Output Pressure Aquarium Accessories Please note, that not like other regulators, this regulator would not have a locking pin to keep air and cannot be used straight It must be utilized in conjunction with different valves If you have any questions, please feel free to contact customer service and we are able to be happy to answer them for you Max Input Pressure: 4500psi Output Pressure: 0 to 3000psi adjustable Input thread: M18*1 or 5/8"-18UNF Output thread: G1/2(0) Weight: 0 Material: Aluminium Alloy and Stainless metal 2023 new design, output strain vary is greater and output stress is more correct and steady The strain gauge under shows the cylinder stress (input pressure), while the pressure gauge above displays the output pressure How to use: 1 Install the regulator on the cylinder/tank 2 Rotate the adjustment screw to turn off the output At this point, the output strain is 0 three Connect the mandatory adapter to the regulator and confirm that the seal is intact four Use a hex wrench to show the adjustment screw and note the pressure gauge above, that may exhibit the value of the output pressure 5 After use, completely shut the adjustment screw to set the output stress to zero Then remove the adapter Important reminder: When the regulator isn't always connected to adapter, please be certain that the adjustment screw is completely closed, otherwise fuel will leak Uses: hearth respiratory equipment air bottle, scuba respiratory apparatus air bottle, fixed pressure valve, excessive strain pump, is also equipped in fire, medical rescue, rescue and different vehicles, in the fire, coal mine and chemical accidents and other disaster coincidence scene

• 
• 
• 
• 
• 

Review