Description

• MPPT 0-4000W huge power Hybrid Wind Solar Charge Dischage Booster Controller Regulator With Dump Load Wind Generator Solar Panel Product Description: Product Features(1) The reveal adoptscolor display design, the display information is extra comprehensive, the reveal interface is clearer, and the 4-key man-machine interface and operation surroundings are extra convenient;(2) The MPPT management set of rules used for Wind charging ensures MPPT charging at low wind speed; (3) Wind three-stage charging mode: MPPT charging; lifting charging; floating charging (4) Solar three-stage charging mode: CC (constant current); lifting charging; floating charging (5) 12V/24V battery system mechanically recognizes, or 12V/24V/48V battery method mechanically recognizes (Optional) (6) RS485 communicationcan provide conversation protocol to facilitate unified leadership and secondary development for customer; (7) The controller working parameters would be viewed and set via themobile phone APP( Optional ); (8) The controller has comprehensive protection functionssuch as overcharge, over discharge and overload; (9) Four battery kinds charging modec an be selected for operation: Lead-acid battery, Ternary lithium battery, Lithium iron phosphate, Custom ; (10) The controller has varied load control modes, the burden has two outputs, and the output power and time would be set; (11) The controller has large adaptability, adaptive day and night Application controller is appropriate for wind solar off-grid system, automatically controls charging and discharging, and may be applied in conversation base stations, family systems, avenue lights systems, monitoring and other fields Product Highlights The controller adopts colour screen design, the exhibit news is more comprehensive, the demonstrate interface is clearer, the controller supports WIFI module and GPRS module to broaden and implement APP cloud tracking (optional) Product Parameter: 1 System Parameter of section Model 2000W1010 22000W1012 2400W1212 2700W1215 3000W1515 4000W2020 System Rated Voltage 12V(9V-16VDC) / 24V(18V-32VDC) / 48V(42V-60VDC) Solar Module Voc 27(12V) / 55(24V) / 105V(48V) Vmp >Vbat+1V Imp Power ÷ Rated Voltage +1A (eg:1500W Solar Module ÷ 48V( Rated Voltage)=32A) Workable Power (max) 0W~1000W 0W~1000W 0W~1200W 0W~1200W 0W~1500W 0W~2000W Wind Turbine Rated Voltage 12VAC（20）/ 24VAC (41）/ 48VAC（83) Rated Current Power ÷ Rated Voltage +1A (eg:1500W Solar Module ÷ 48V( Rated Voltage)=32A) Workable Power (MAX) 0W~1000W 0W~1200W 0W~1200W 0W~1500W 0W~1500W 0W~2000W Max Open circuit voltage 25(12VAC) / 51(24VAC) / 102(48VAC) Special Note: The following are the optimal parameter settings, Suggest do not modify Uunder Over Discharge Voltage 10 / 21 / forty three Runder Over Discharge Return 13 / 26 / 52 Uover Over Charge Voltage 15 / 31 / 62 Rover Over Charge Return 15 / 30 / 60 BCV Increase Charge 14 / 28 / 57 Float Floating Charge thirteen / 27 / 55 Ufanbraking Wind Breaking Voltage 25 / fifty one / 102 DC Load Out Power 0W~180W (Per one-way) 0W~700W (Per one-way) 0W~1400W (Per one-way) Rated Voltage 12VDC 24VDC 48VDC Current Max 30A(15A*2) 60A(30A*2) 60A(30A*2) Conversion Efficiency ﹥98% Operation Mode Default to streetlight mode Environment Temperature 1) Working:-20℃～50℃; 2)Storage:-30℃～70℃ Humidity (°C) 10% ～ 90% No condensation Protection Grade IP30 Battery parameter reference table： Lead acid battery (single 12V) System rated voltage / V 12V system (1 string) 24V formulation (2 strings) 48V method (4 strings) 12V default value Overvoltage (overcharge) / V 13～17V 26～34V 52～68V 15 Overvoltage return / V 13～17V 26～34V 52～68V 15V Increase charging voltage / V 9～15V 18～30V 36～60V 14 Floating payment voltage / V 9～15V 18～30V 36～60V thirteen Undervoltage /V 7～13V 14～26V 28～52V 10 Undervoltage return voltage /V 9～15V 18～30V 36～60V 13 Ternary lithium battery (single section 3) System rated voltage 12V method (default 3 strings) 24V method (default 6 strings) 48V method (default 12 strings) three string defaults Overvoltage (overcharge) / V 10～15V 21～30V 42～60V thirteen Overvoltage go back / V 10～15V 21～30V 42～60V 12 Increase charging voltage / V 10～15V 21～30V 42～60V 12 Floating fee voltage / V 6～13 12～27V 24～54V 12 Undervoltage /V 6～13 12～27V 24～54V 9 Undervoltage return voltage /V 6～13 12～27V 24～54V 10 Number of strings 3～4 6～8 14～18 3 Lithium iron phosphate (single section 3) System rated voltage 12V components (default three strings) 24V formulation (default 6 strings) 48V system (default 12 strings) 3 string defaults Overvoltage (overcharge) / V 9～12V 18～24V 36～48V 11 Overvoltage go back / V 9～12V 18～24V 36～48V 11 Increase charging voltage / V 9～12V 18～24V 36～48V 10 Floating fee voltage / V 9～12V 18～24V 36～48V 10 Undervoltage /V 6～12V 12～24V 24～48V eight Undervoltage return voltage /V 6～12V 12～24V 24～48V nine Number of strings 3～4 6～8 14～18 three About MPPT Start Voltage: 12V battery System, the wind generator votlage needs to arrive 8V 24V battery System, the wind generator voltage needs to arrive 16V 48v battery System, the wind generator voltage needs to arrive 32V Battery form atmosphere Similarly, different battery kinds and custom modes can be set through a similar system as above The electronic serial quantity and battery kind reference desk are as follows: Number variety type of battery definition 1 Sealed Lead-acid batteries 2 LiFePO4 Lithium iron phosphate battery three LiNiCoMn Ternary lithium battery 4 Custom customize Time management parameter setting Remark: In an analogous way, the time and area second time period T2, the second one time period output energy P2 percentage and the gap time 1/3 time period T3, and the 1/3 time period output power P3 percentage could be set; About: APP (WIFI ) connection machine setting method, please seek advice from the corresponding APP manual; Large Size Screen Design: Screen for 1500W Solar Panel and 1500W Wind generator Screen for 1200W Solar Panel and 1200W Wind generator Screen for 1500W Solar Panel and 1500W Wind generator FAQ 1 want MARS ENERGY as a provider of products? (1) Mars Energy is famous model on the international market in new calories business We have solid R&D technical groups and professional manufacturing lines; (2) Mars Energy is a manufacturer focusing on the production of controller from China It has an entire quality leadership system and cost management advantages; (3) Mars Energy is a pacesetter in cross-border e-commerce After decades of operation, Mars Energy has completed the combination of the provision chain (4) Mars Energy has established gross sales and after-sales teams in several countries, which may provide pre-sales guidance and after-sales carrier in a local language; (5) Since fitting a golden member of AL ABABA in 2005, Mars Energy has gained praises from extra and more clients world wide for its professionalism, responsible angle and positive 2 to connect these 3 terminals of controller with my wind output wires? (1) To AC wind turbine, any one of 3 wires from wind turbine can be linked with any terminal of wind on your controller For they are non-electrode; (2) To DC wind output is two wires(Positive Negative) , you might connect them with any wind terminals in your controller 3 many connecting ways person can desire when utilizing this controller? For the wind charging and Solar charging are independent, so person can desire any one of the ensuing as the connection formulation : (1) Only connect wind turbine generator to payment battery; (2) Only join solar to charge battery; (3) Connect wind turbine and photo voltaic to construct a hybrid wind solar power system to payment battery 4 i solely connect wind turbine as generator to payment battery when i get my controller? Yes, you can to achieve this But for the foremost goal of such controller designs for low power consumption equipment charging, such as: avenue lighting and monitoring and so forth So set up hybrid wind photo voltaic components can recuperate charging warrantly Because most of low-power wind turbine is installed in or close to the residential place, wind era performance is not excessive due to low wind velocity and quick working time five to attach my formula once I get this controller? We strongly recommend consumer to install air swap between all DC and AC input or output Then please switch on the breaker/ air change on this order: (1) First turn on the breaker between battery and controller; (2) Second switch on the breaker between wind and controller; (3) Third turn on the breaker between DC load and controller; (4) Final switch on the breaker between Solar and controller Remark: If you desire to close down the system, please continue in the opposite order as above 6 i must install additional light holding for my power system? Yes, it is best method to install additional light protecting 7 the controller to function when the wind speed is simply too fast? (1) For the output voltage or recent from wind generator which beyond the safety range, the controller will robotically activate the brake and gradually slow down Meanwhile, the sell off load will start to eat extra latest directly (2) But when encountering stable hurricane weather, akin to hurricane, typhoon, it's strongly counseled to put down the wind turbine directly 8 to design hybrid wind solar power method voltage, 12V, 24V, 48V, which one is best to me? (1) The method voltage is similar to the voltage of the battery pack; (2) Once the battery voltage designed, the enter voltage from wind turbine generator and photo voltaic modules should be matched in keeping with the specs within the parameter table; (3) Therefore, users cannot easily suppose that more lower voltage design, can get extra bigger charging latest but ignore that the immoderate current has exceeded the operating range of the controller or battery to wreck the controller or battery 9 designed in MPPT? (1) Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine&;s electrical energy can still be used; (2) In the excessive wind velocity or the Wind turbine of energy is past the scope of the battery and load absorption, the controller straight released the step-less unloading function,protection components of the kit 10 the wind generator is hooked up to the controller, why its running pace becomes very gradual immediately? (1) The battery reaches the floating voltage; (2) The rated output voltage of the wind generator is way larger than the battery, since the speed of the wind generator is proportional to the output voltage, and the voltage is dragged by way of the battery, so the rate will be very low; eleven wind generator unload load when the controller displays small current? The controller protect the all formulation by way of detecting battery voltage, charging current and temperature and so on When the battery attain floating price voltage or high temperature, the wind generator will unload load, whatever how a lot charging current it is 12 there exhibiting no charging latest on LCD display however the wind is working or the solar is working? Only when the input voltage of photo voltaic panels or wind generator higher than battery then it'll charge the prerequisite is that the battery is correctly connected and not totally charged thirteen the LCD would not mild up? For the flexibility of controller comes from battery or solar when its working So please test photo voltaic enter or battery as follows: (1) The battery didn&;t join the controller well, please examine the battery and controller connection; (2) Battery is damaged, please verify and update the battery; (3) In good solar day the photo voltaic enter is workable or not 14 varieties of parameter of this controller is adjustable by means of user? (1) All information were set for the best charging work earlier than packing, so no need to make any settings for sealed battery The default is sealed battery too; (2) To lithium-ion batteries, user solely deserve to choose the corresponding battery variety consistent with the guide operation guide, so there isn't any should regulate the parameters; (3) If the pro users want to make additional parameter changes for their own lithium battery characteristics, Pilot version and Deluxe Version are supported 15 LCD display, what variety of data i'm able to set? (1) Float charging voltage (2) Wind turbine unloading voltage (dump load) sixteen form of discharge section working mode can be set? light management mode, time control function etc, The user could be establish consistent with the requirements on its personal mixture

• 
• 
• 
• 
• 

Review