Note:
The relay controller is RF Receivers,the wall change is RF solely swap itself cannot management lighting fixtures on off must work with rf receiver collectively
Feature:
1 New mini round wireless panel switch(50mm*50mm*15mm)
2 10A power: compatible for most equipment, safer to apply
3 Mini body: would be straight installed within the swap backside box, maintenance and set up are more handy
four Up to 50 meters remote range more obstacles, the shorter the distance, the more critical the sign loss
five After turning off the power, switch on the power again, the machine repute is off
Specification:
Transmitter (Remote) :
Operating frequency: 433MHz
Power through 2 Pcs 3V CR2016 Battery (Battery included )
Material: PVC;
Button: 2 buttons;
Size: 60mm x 30mm;
Operating voltage: 3V ;
Operating Current: 12mA;
Transmitting power: 10mw;
Modulation mode: ASK (AM)
Encoding type: Learning
Transfers distance: 20~50m
Controller (Receiver) :
Input Power: AC85-240V 60HZ/50HZ
Max current: 10 A
RF Frequency: 433Mhz
Working temperature:-30~+80
RF operating mode: superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: more than 50 m ( open space)
Remote storage:10pcs
Support distant type: Learning code 1527code
Size: 47*42*22 (mm)
How to get the signals?
Step 1: Press the training button(on the Receiver) two times Wait for 3 seconds;
Step 2: Press one button on the handheld remote control Wait for three seconds Succeed
How to clean the signals?
Only one step :Press the training button(on the Receiver) eight times