Descriptions

• The world&;s smallest micro-motor ahead and opposite Remote controller, it enter DC3V-12V output DC3V-12V , to control the output high quality (VCC+) and negative(GND-) exchange, voltage from DC3V to 12V all voltage is fine , MOS non-contact （Contactless) (No Noise ) silent receiver, Volume 21mm * 11mm * 5mm, ultra-low power standby recent is only 0, it is suitable for battery-powered motor, particularly the door mini motor which with a small battery-powered Working voltage: DC3V-12V ( if battery please greater than DC3) (Wide operating voltage DC3V-12V , 3 3 3 4 5V 6V 7 9V 12V All are ok) Working current: 6ma Standby current: 0 (Ultra low standby current, it's compatible for battery-powered, when it's standby will automatically input the low-power sleep state, please press the handheld remote control button keep for 0 seconds or more) Maximum load: 0 (400ma mA) have higher load less than 0 (200ma mA) (The receiver itself with overcurrent protection, when the current exceeds the rated current, could be entered into turn off power protection, resembling the motor to start or block the current is doubled, beyond the rated latest might be flash) Operating frequency: 433 Size: 21 * 11 * 5mm Momentary-----------Press and maintain the "Up" button,Motor Forwards , Press and hold the "Down" button the Motor Reverse Latched-----------Press the "Up" button for one time ,Motor Forwards , Press "Stop" Button to prevent Press the "Down" button for one time the Motor Reverse "Stop" Button to forestall it is the world&;s smallest motor controller, the motor&;s voltage and current goes in the course of the receiver, before your buy measure your motor precise operating voltage and Current you to your cooperation

• 
• 
• 
• 
• 

Révision