Description

• The world&;s smallest micro-motor forward and reverse Remote controller, it enter DC3V-12V output DC3V-12V , to regulate the output advantageous (VCC+) and negative(GND-) exchange, voltage from DC3V to 12V all voltage is okay , MOS non-contact （Contactless) (No Noise ) silent receiver, Volume 21mm * 11mm * 5mm, ultra-low strength standby recent is barely 0, it is appropriate for battery-powered motor, particularly the door mini motor which with a small battery-powered Working voltage: DC3V-12V ( if battery please greater than DC3) (Wide operating voltage DC3V-12V , 3 three three 4 5V 6V 7 9V 12V All are ok) Working current: 6ma Standby current: zero (Ultra low standby current, it's compatible for battery-powered, when it is standby will automatically enter the low-power sleep state, please press the remote control button maintain for 0 seconds or more) Maximum load: zero (400ma mA) have greater load less than 0 (200ma mA) (The receiver itself with overcurrent protection, when the current exceeds the rated current, may be entered into flip off power protection, similar to the motor to start or block the present is doubled, past the rated latest could be flash) Operating frequency: 433 Size: 21 * eleven * 5mm Momentary-----------Press and maintain the "Up" button,Motor Forwards , Press and hold the "Down" button the Motor Reverse Latched-----------Press the "Up" button for one time ,Motor Forwards , Press "Stop" Button to prevent Press the "Down" button for one time the Motor Reverse "Stop" Button to prevent it is the world&;s smallest motor controller, the motor&;s voltage and recent goes during the receiver, earlier than your buy measure your motor precise working voltage and Current you in your cooperation

• 
• 
• 
• 
• 

Review