说明

• YIDI 5/10 pcs PB Pneumatic Air Hose Fitting 4mm 6mm 8mm 10mm 12mm 4 6 eight 10 12 to Male Thread Equal Branch TEE Quick Pipe tube Adapter Connector Connectors BSP 1/8 1/4 3/8  half 01 02 03 04 Specification: Item No.: PB Connection Way: One-Touch Quick Connection Type: Hose to Male Thread Design: Equal Branch TEE Material: Nitrile Rubber, Plasticn , Metal Fluid Type: Clean Air, Vacuum, No Toxic Gas Applicable Hose: SolfNylon, Polyurethane Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar) Max.Operating Pressure: 15.0 bar(1.5MPa) Negative Pressure:  -750mmhg (10Torr) Ambient And Fluid Temperature: 0~60℃ (140℉) Hose Size Options   Type M5 METRI M5*0.8 01 BSP (R) 1/8" 02 BSP (R) 1/4" 03 BSP (R) 3/8" 04 BSP (R) 1/2" 4 (Hose O.D. 4MM) √ √ √ √ × 6 (Hose O.D.6MM) √ √ √ √ √ eight (Hose O.D.8MM) √ √ √ √ √ 10 (Hose O.D.10MM) × √ √ √ √ 12 (Hose O.D.12MM) × √ √ √ √ We have one other websites within 14/16MM Hose O.D. Tpye for ordering. Installation Instructions   Installation Grasp the tubing and slowly push it into the correct till it involves stop. The tubing can be locked by means of the spring gasket. Remove Push the discharge button to open the spring gasket so that the tubing could be released. Cautions: 1. Cleaning: Clean the piping before connection to take away debris. 2. Tubing Cut: Ensure a perpendicular reduce without scratches on the tubing's outer diameter. 3. Pipe Length: Avoid excessive bending; choose a formal pipe length. 4. Connection: After connecting, pull the tubing gently to ascertain its seal. 5. Release: Push calmly at the release button flange for proper tubing withdrawal. 6. Removal: Avoid rotating the tubing entirely throughout removal. 7. Assembly: Ensure no particles enters when screwing pipes and fittings together. Safety Instructions 1. Pressure: Ensure zero pressure within the tubing before removal. 2. Spatter Zones: Avoid standard fittings in spatter-producing areas. 3. Monitor Conditions: Stay within specified pressure and temperature ranges. 4. Environment: Avoid corrosive gases, chemicals, and severe conditions. 5. Placement: Avoid locations with heavy vibrations or shocks. 6. Direction: Install tubing within the correct one-way direction. Dimension

• 
• 
• 
• 
• 

审核