说明

• Music controller DC5V-24V SPI RGB Smart dream coloration to manage 250pixels for 5050 ws2811 ws2812b led strip modules strings product description: 1 The "power-and-go" clever controller can mechanically replace from the tune marquee mode to the final marquee mode by means of means of figuring out the audio input signal. And it's going to replace automatically in hundreds of kinds by way of technique of the inner algorithm. 2 parameters 1. Operating temperature: -20 - 60 2. Operating voltage: 5V – 24V 3. Signal output: SPI signal, 250pixels; relevant lamp bead: WS2811/WS2812. 4. Consumed power: < zero 5. Product size: 81mm×51mm×23mm 6. Product web weight: 58g 3 disorders 1. Through the various mild combination forms of gentle bar, string smooth and point-source light, combined with the pattern layout, the personal touch can be realized. 2. The controller is the general type, and wishes to be well matched with various styles of music. The controller's distinction for the kind will depend upon the depth of the audio enter signal. If the brilliant light exchange is needed, flip the amount as a lot because the maximum, and the loudspeaker is adjusted via the integrated quantity control function of the audio. 3. It is suggested to apply the low-light level backing gentle in total darkness and keep an acceptable distance, to be able to quit the eyes discomfort. 4. The audio cable size is diverse within the installation, and the product's audio cable is mainly used for checking out function, and it is told to come to a decision the better-performance audio cable with overlaying functions, so as to get the better sound quality and stop the audio cable noise brought on by the antenna effect. 5. The controller receives the input sign from the 2 left and correct channels, and only 1 channel enter will tremendously lower the effect of sunshine change. And AM to AM three audio cable makes use of the three-stage contact with the two-channel mode, and please don't use the four-stage contact with the microphone mode. 6. Output two ways using the one-to-two audio contact or one-to-two couple line immediately from the participant to the controller and audio. Do not use the one-to-two lotus contact that separately outputs the left and right channel, leading to just one channel input of the controller and audio. 7. In order to better stick to the original variety of music, the audio acquisition of controller adopts the 3 audio cable input, instead of gathering the sound using microphones. 8. The controller's output skill is limited, so the signal amplifier is required to increase the signal line or multiplexed output. The signal amplifier can isolate the power among mild bars of other voltage, sharing the sign among smooth bars of different voltage. four 1. Avoid using it in damp environment, and avoid contacting with water and different liquids. 2. Use the product far from magnetic field. 3. Do not let the youngsters touch the wiring, as a way to bypass the wear brought on by the product interface and wiring errors. 4. Non-professional user is forbidden to open the shell. 5. The product appearance makes use of the steel material, so the rust due to the scratch, surface layer peeling and pure metallic oxidization are past the scope of the warranty.

• 
• 
• 
• 
• 

审核