说明

• 1 inch 6-bit Clock LED Digital Electronic Clock W moment demonstrate Module GPS, Beidou timing strength off reminiscence Brightness adjustment dc 5V Satellite timing clock Alarm clock temperature exhibit Clock electric parameters: Power supply: TYPE-C USB 5V energy supply, back or right side of the ability delivery port Working current :100mA Product Description: GPS, Beidou satellite tv for pc timing domestic clock With moment display No guide time setting, The clock positioned near the window (recommended not more than 2 meters faraway from the window) will mechanically obtain GPS or Beidou satellite calibration time Normal use can keep the time minute-by-second, long-term accuracy The clock has an automatic brightness function, which automatically adjusts the display screen brightness according to the ambient light, and isn't always dazzling at evening There are time, date, temperature functions, there are three alarm clocks Tip: There is a memory battery inside the digital clock, Setting key: In the traditional show state, press this key to go into the time \ date \ 12 months setting Press the Set key, "score" begins to blink, press the upload and subtract keys to adjust the value After the adjustment, press the Set key, "when" begins to blink, press the add or subtract key to regulate the value Then press the atmosphere key to go into the date adjustment, "day" began to blink, after the adjustment, press the environment key "month" began to blink, after the adjustment, press the setting "year" started to blink, after the adjustment, press the setting Key Save all information and go back to normal demonstrate state [Tip] The clock has a GPS automated timing function, and placing the clock close to the window can routinely achieve the correct time with out manual adjustment Add key: Under the normal demonstrate state, press this key to switch the four display states: [Time] → [date] → [temperature] → [Alternate cycle display] (Note: The exhibit items and switching period time beneath the alternating cycle exhibit state would be explained by means of the "dd" and "dF" parameters, respectively, see the description of "reduction key" for details) Minus key: In the traditional reveal state, press this key to go into the tradition parameter setting, press the "plus key" to change the parameter value, the which means of the code please consult with the following desk Ac: Temperature error calibration parameter The tremendous quantity represents the increase, the destructive number represents the decrease, the unit is degree, the adjustment differ is -5~5 For example, while you feel that the displayed temperature is 1 degree increased than the particular temperature, then set it to Ac:-1, so that the digital clock is automatically diminished by 1 degree after which displayed (Note: If you don't have a standard thermometer to refer to, it is suggested to keep this item Ac: 0) dd: The exhibit merchandise of the custom loop display: [dd: 0] Time + date + temperature [dd: 1] Time + temperature [dd: 2] time + date dF: signifies the switchover interval, expressed in seconds The cost ranges from 1 to nine For example, dF: three signifies that the switching interval is set 3 seconds LL: Display brightness point The adjustment range is 1 to 9 LL: 1 is the darkest and LL: nine is the brightest (Note: Manual brightness adjustment can only take impact when the AL possibility is AL: 0, in any other case the brightness of the reveal may be routinely controlled through the digital clock) AL: computerized brightness management switch, AL: 0 is to show off computerized brightness control, AL: 1 is to show on automated brightness management When set to AL: 1, the digital clock will robotically locate the ambient mild depth to mechanically replace the show brightness BP: alarm bell switch, BP: 0 is to show off the alarm bell, BP: 1 is to turn on the alarm bell [Tip: When the alarm is ringing, you could press any key to mute it] EE: Set the time zone according to the local time zone Note: This characteristic only works when the sync mild is on Alarm: In the conventional display state, press the alarm button to adjust the alarm time This digital clock has three units of alarm clocks When adjusting, listen in on 1,2,3 displayed at the correct aspect of the digital clock It stands for 1, 2, three alarm clocks [Tip: If you only wish to ring the alarm clock once a day, you would set 1,2,3 teams of alarm clocks to the same value, then the discharge has stopped, and the APP does not demonstrate the present output It is such as using only one set of alarm clocks, that is, just one alarm clock a day

• 
• 
• 
• 
• 

审核