说明

• Welcome to 5APlus Factory Store 320℃ Volcano Hotend Ceramic Heating Core Kit Set A-S, Set A-T, Set B-S, Set B-T, Set C-S, Set C-T : these sets use 104NT Thermistor , they will suitable for E3D V6 Volcano， MK3S，pursa i3，Voron 3D Printers Set D : This set use B3950 thermistor, it is suitable for Anycubic vyper ,kobra Max, kobra plus 3D printers Note: When you order it, please check the thermistor you need and setting the correct parameter. Warm tip: Our products are tested before shipment, so there will be slight usage marks on the surface of the product. Advantage： 1.In the actual the v6 kit test the time to reach 260℃ is about 50s ， and the volcano kit to reach 260 ℃ only need 23s. Ceramic Heating Core build-in copper plated heating ring,the ceramic can be heated evenly and rapidly to achieve 360°annular heating. 2.Ceramic ring Heatblock High temperature resistance up to 320℃ 3.Ceramic heating ring with built-in copper plated heating ring. The ceramic canbe heated evenly.Rapid heating. Realizes 360°ring heating Structure: 1、Applicable to all types of the consumables PLA,PETG,TPU,ABS....high quality printing accuracy andgood durability. 2、Ceramic Heating Corebuild-in copper plated heating ring,the ceramic can be heated evenly andrapidly to achieve 360°annular heating. 3、Heater cartridge: 24V/80W Thermistor:104NT-4 or B3950 4、M6 thread design. Smooth thread effectively prevent dissolved supply leakage. Rapid Heating: Ceramic heating ring has the characteristics of rapid temperature rise. In the actual testthe time to reach 280℃ is about 50s. Set A- Set C: 1.104GN thermistor set 2.extension cable 3.Hardened Steel Volcano Nozzle 4. Silicone sock 5. throat B3950 thermistor set: Compatible for Anycubic vyper ,kobra Max,kobra plus 104GN thermistor set: Compatible for E3D V6 Volcano，CR10，MK3S，pursa i3 Throat type 1: Name: Titanium Aolly Bimetal heatbreak For Any cubic Mega S /Mega Pro Vyper Throat type 2: Material: Titanium Alloy / Stainless Steel For All metal 1.75mm Filament For PTFE lining For Bore 4.1mm Nozzle : Hardened Steel Volcano Nozzle Nozzle characteristics: It is made of high-quality thermoforming, high temperature carburizing and hardening treatment. It has super wear resistance, heat resistance, high hardness and high toughness, long service life, compatible with most high temperature printing filaments on the market . 1: The bottom of the nozzle is flat and fits perfectly with the throat, effectively avoiding material leakage, and the chamfer is rounded to reduce the resistance of the edges to the consumables 2: Bright appearance, clear lettering, accurate identification of aperture size 3: Super long size, large flow, suitable for fast printing models *Built-in 104NT-4-R025H42G Thermal Firmware setting as the following: Marlin Firmware Configuration * 5:100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5 Repetier: (ATC Semitec 10GT-2) Klipper: (sensor_type: ATC Semitec 104NT-4-R025H42G) 1. Our CHC ceramic heating products provide 104NT and B3950 thermistors for your choice. The thermistor is not glued inside the heating block, you can replace the thermistor at any time. 2.Our CHC ceramic heating products, the nozzle fixing block (heating block) is made of red copper, and the exterior is nickel-plated, which not only ensures high-temperature printing, but also enhances the durability of the product. 3.Our CHC ceramic heating products use highly heat-conducting materials to ensure efficient heating. Meticulously designed and crafted, guarantee the ceramic heating cores' quality and reliability. With a focus on first-class quality, we aim to provide a durable and user-friendly experience.

• 

审核