说明

• 2P 3P DC Surge Protector PV SPD 500V 1000V System Used 20KA 40KA SPD With PE Lightning Protect Wind Generator Solar This surge protector chiefly used light volt strength distribution system of lightning surge defense or different transient overvoltage constructed for prime voltage dc strength delivery overheating over-current protection function, may give grade C for photovoltaic (pv) energy components brief protection utilizing 35 mm DIN rail installation, module can replace independently, clean to install and maintain, with distant verbal exchange alarm interface (dry contact), surge protector to facilitate remote tracking Technical parameters Nominal PV System Voltage 500V/600V 1000V 1200V SOLAROV [UCPV] 630Vdc/700v 1170Vdc 1200Vdc Max System Discharge Current (8/20 µs) [lmax] 40kA 40kA 30kA Voltage Protection Level [UP] ≤2 ≤4 ≤4 Voltage Protection Level at 5kA [UP] ≤2 ≤3 ≤4 Integrated Fuse Breaking Capacity/Interrupting Rating 30kV/1000Vdc 30kV/1000Vdc 30kV/1200Vdc Technology Short-Circuit Interruption (SCI) Overcurrent Protection Operating Temperature Range [TU] −40℃ to +80℃ Nominal Discharge Current (8/20 µs) [(DC+/DC−)­­> PE] [In] 12 Response Time [tA] <25ns Operating State/Fault Indication Green (good)/Red(replace) Conductor Ratings and Cross­Sectional Area: Minimum 60/70℃ 1²/14AWG Solid/Flexible Maximum 60/70℃ 35mm²/2AWG Stranded/25mm²/4AWG Flexible Mounting 35mm DIN Rail consistent with EN 60715 Enclosure Material UL 94V0 Thermoplastic Degree of Protection IP20 Capacity 3 Modules, DIN 43880 Standards Information: IEC 61643­11 Type 2,IEC 61643­1 Class II Product Warranty Five Years** Remote Contact Signaling Remote Contact Signaling Type Changeover Contact AC Switching Capacity (Volts/Amps) 250V/0 DC Switching Capacity (Volts/Amps) 250V/0; 125V0; 75V/0 Conductor Ratings and Cross-Sectional Area for Remote Contact Signal Terminals 60/75℃ Msx 1²/14AWG Solid/Flexible Ordering Information Order from Catalog Numbers Above

• 
• 
• 
• 
• 

审核