说明

• Specifications Of The Transmitter: Model Number : KT05-4 Operating Frequency: 433MHz Power by way of 3V Coin Cell Button Battery (Battery integrated ) Material: PVC Button: 2 Buttons Size: 59mm x 28mm x 8mm Operating Voltage: 3V Operating Current: 12mA Transmitting Power: 10mw Modulation Mode: ASK (AM) Encoding Type: Learning Transfers Distance: 20-50 m Specifications Of The Receiver: Model Number :KR3001A-4 RF Working Mode: Superheterodyne Reception Modulation Mode: ASK Working Mode: Momentary, Toggle, Latching and Time Delay Mode Input Voltage: DC 5V ~ 60V RF Frequency: 433MHz Quiescent Current: 5mA Receiving Sensitivity: >97dbm Remote Control Range: >100m (Free Space) Wired Connection Way: Fixed Wiring Pillar Decoding Mode:MCU Software Decoding Working Mode:Momentary, Toggle, Interlocked Mode Latching Time put off (5s ,10s ,15s ) About Working Mode: Momentary: Press the distant button, the relay connects, release the distant button, the relay disconnects Toggle: Press as soon as the distant button, the relay connects, press the distant button twice, the relay disconnects Latching: Press the distant button A, the relay connects, press the distant button B, the relay disconnect Delay Mode: Press the remote control button, the relay connects; Start timing when launch the distant button, the relay disconnect routinely after 5s or 10s or 15s Clearing the Code:Press the Learning Button on the receivers for 8 times, the codes could be cleaned After cleaning the code, all the remote control can't work any longer Learning the Code:(Momentary)Press the educational key at the receiver once time, it comes into temporary environment mode Wait for a moment, the LED may be off , it comes into learning state Push the distant button, LED indicator at the receiver board will flash then come off After 3 seconds, the LED indicator will be on again, learning successfully Learning the Code: (Toggle) Press the training key at the receiver two times time, it comes into toggle setting mode Wait for a moment, the LED could be off , it comes into studying state Press the remote button, LED indicator at the receiver board will flash then come off After three seconds, the LED indicator can be on again, learning efficiently Learning the Code:( Latching) Note: When you choose for latching mode, as a way to learn extra remote control, you should learn two varied button, the first time learning is for ON, the second time studying for OFF For example: Button A = ON, Button B = OFF Press the learning key at the receiver triple time, it comes into latching mode Wait for a moment, the LED indicator at the receiver board will flash then come off Press the remote button A LED flash for five instances Press the distant button B LED flash for five instances After 3 seconds, the LED indicator may be on again, studying successfully A = ON, B = OFF Learning the Code :(Time Delay Mode) Press the training key at the receiver 4 times, the time delay for 5 seconds Press the learning key at the receiver five times, the time delay for 10 seconds Press the learning key at the receiver six times, the time delay for 15 seconds The LED indicator may be off Press the remote button, LED flashes and rancid After three seconds, the LED indicator will be on again, potential studying successfully

• 
• 
• 
• 
• 

审核