说明

• ANENG AN870 Profesional Digital Multimeter 19999 Counts True Rms AC/DC Voltage Current NCV Transistor Accurate Auto Range Tester Introduction This product is a battery-powered, true-rms, auto-ranging digital multimeter with a 19999 LCD reveal and a backlight B Safety Information To avoid probable electrical shock, fire, or own injury, please learn all safety information before you employ the product (1) Do NOT exceed the "maximum value" indicated within the Specification (2) Examine the relationship of the verify leads and the insulation of the product earlier than measuring voltage larger than 36V DC or 25V AC (3) Disconnect the check leads from the circuit before changing the mode (4) Misuse of mode or differ can result in hazards, be cautious "OL" will be shown on the display when the input is out of differ Function Range Accuracy DC Voltage 19/199/1/19/199/1000V ±(0％+ 3) AC Voltage 19/199/1/19/199/750V ±(0％+ 3) DC Current 1 /19 / 19 /199 /99μA /1999μA ±(0%+3) AC Current 1 /19 / 19 /199 /99μA /1999μA ±(0%+3) Resistance 199Ω ±(0%+3) 1Ω/19Ω/199Ω ±(0%+3) 1Ω/19Ω ±(1%+3) 199Ω ±(5%+5) Capacitance 9 ±(5%+20) 99/999/9/99/999 ±(2%+5) nine ±(5%+5) Frequency 99/ 999/ 9/ 99/ 999/ 9 ±(1%+2) Duty Cycle 1%~99% ±(1%+2) Brand Name ANENG Model AN870 Display(LCD) 19999counts Ranging Auto/Manual Meterial ABS Update Rate 3Time/Second Ture RMS sure Back Light yes Date Hold sure Relative Measurement sure MAX/MIN sure Low Battery Alect sure Auto Power Off yes Diode sure Continuity yes NCV yes Packaging 1* Multimeter 1* Combination line 1* Instruction manual 1* Standard wiring 1* Temperature size line Warning: 1 Do NOT exceed the "maximum value" indicated in the Specification; 2 Do NOT enter voltage on the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode; 3 Do NOT use the product when the batteries or the battery disguise isn't always placed properly; four Turn off the product and remove the test leads from the test features earlier than replacing batteries or fuses

• 
• 
• 
• 
• 

审核