ANYCUBIC Photon Mono M5s Print Like a Master 10.1" 12K Screen | Leveling-Free | 3X Faster 12K Exquisite Details The Photon Mono M5s is the 12K resolution of its 10.1-inch screen, achieving a 19-micron X accuracy,with printing details as precise as a hair thickness. Leveling-Free, Ready to Use A mechanical sensor on the cantilever arm detects the fit between the printing platform and the floating leveling module and automatically adjusts it based on the detection results. This eliminates the risk of leveling failure, improves printing success rate. Upgrade the printer at a user-friendly level, making the printing experience easier. 3X Faster Photon Mono M5s is able to reach a 105mm/h*average printing speed. It uses a high-speed release film able to lower the release force, which ensures a high printing success rate while reducing the release height and increasing the lifting speed. Resin Printing Speed Test Smart, Simple and Efficient Auto Device Check by conducting multiple tests on the connectivity of the exposure screen, mechanical detection module, and motor operation status, it quickly detects and troubleshoots hardware problems, ensuring smooth and non-destructive connections to help achieve printing success. Resin Detection To reduce printing failures caused by a lack of resin, a pre-set resin detection mode that smartly detects whether the amount of resin in the vat meets the printing requirements before printing. Prints status detection Prints status detection feature will provide reminders for common bottoming-out printing failures, greatly reducing waste of resin and time. It also smartly analyzes failure reasons and provides effective suggestions to ensure printing efficiency. Anycubic App Popular sliced models/STLs available for you to experience 3D printing in just one touch. Task viewing ensures your printing process in control. Upgraded Anycubic Photon Workshop 3.1 In the new version of slicing software Anycubic Photon Workshop 3.1, the"Intelligent Mode" option can intelligently match exposure parameters according to model details and size, reduce the risk of printing failure caused by improper parameter settings. The new support algorithm further improve the printing stability and success rate, reduce the damage on the model surface, and the support and bottom valve are easier to remove. Realize one-click repair of damaged models, comprehensively improve the speed of punching and slicing, and make slicing easier to use. Empower your Creativity Model Display *Models printed by Anycubic Photon Mono M5s.