说明

• 1.flat-head pliers 2.Nut Plier 3.Soft Wire cutter 4.,Cutting hole for Hard Wire 5.Safety 6.wire bonding hole 7.7# Slotted screwdriver 8.3# Slotted screwdriver 9.Can opener 10.wire stripper 11.Scissors 12.serrated knife 13.File 14.Knife 15.Screw sleeve 16.File Saw interface 17.Ruler 18.Safety 19:T11D Saw 20.T11C Saw 21:Screwdriver Bit Screwdriver Type: 1.PH1+PH2 2.SP8+SP4 3.TT25+TT20 4.TT15+TT10 5.SL6+SL5 6.SL4+SL3 7.H5+H4 8.H2.5 Plier head:3Cr13 hardness:HRC51-55 Handle:2Cr13 Hardness: HRC46-48, Knife:7Cr17, hardness:HRC55-58; Tooth knife (cutting knife):3Cr13, Hardness :HRC52-54; File:3Cr13 hardness: HRC52-54; Saw:3Cr13, hardneses:HRC52-54; Scissors:3Cr13 Hardness:HRC52-54; Opener:3Cr13 Hardness:HRC52-54; Needle:3Cr13 hardness:HRC50-53; screwdriver bit:3Cr13 Hardness:HRC50-53; Bit:33mm Model：SP8+SP4/TT25+TT20/TT15+TT10/SL6+SL5/SL4+SL3/H5+H4/H3+H2.5 Saw parts:58CR4, The maximal twisting force: 130KG Use environment: 1.if you use it in a wet or High Salinity and alkalinity environment, a.wash it by pure water b.wipe it by cloth c.add oil on it 2.if there have stickiness things for some time,you have to clear it by water or detergent at once 3.Clear the tools Oil residue and so on ,,Kindly Use turpentine or mineral oil,forbid to use detergent with chlorine. 4.After cleaning,wipe your tools,add some light oil(such as WD-40 ),so that we can clear the wet and moisture off from Joint. then the tool will not corrupted.. How to sharpen a knife. 1.STRAIGHT KNIFE,USe standard device to sharpen it(grindstone, grindstone and so on ) . 2.serrated knife,you have to use special tools for it,sharpen it by right ways ,can keep serration curvature.Important!!, Just sharpen the front teeth,,don't the back size ,will lead to reduce the knife Function!!!!

• 
• 
• 
• 
• 

审核