说明

• Specification: Note: brushless motor with force plate, positive and detrimental electrode is precisely prohibited, crimson line is attached to the nice electrode, black line is connected to the adverse electrode, similar to incorrect connection will burn the power plate Brand new micro brushless pump, pattern pump, movement pump, brushless liquid pump, diaphragm pump, it has self-priming ability, is a self-priming pump The motor adopts the micro internal rotor brushless motor 310 brushless motor The motor connection is 5P, which is explained as follows: Black line: public GND Red line: high-quality electrode Yellow line: FG (suspended now not connected) White line: PWM (GND direct operation) Green line: direction (can be suspended without wiring) If you just choose the motor to easily run, the purple line is attached to the fine electrode, (black line + white line) is connected to the negative electrode, and the motor is immediately operated, and the voltage of the power supply is adjusted, and the rate also is replaced If you would like PWM pace regulation, enter PWM signal on the white line, and the destructive pole of the PWM signal should also be linked to the black line, so that the task ratio (50%-0%) could be adjusted, the decrease the task ratio, the quicker the speed If you only wish to simply run, it is recommended that the crimson line is hooked up to the high quality electrode, the black line is connected to the negative electrode, and then the white line is attached to the black line, the motor can operate normally, if the black line and the white line are related collectively first, after which the direct power, it may also injury the force board 1 name: DC brushless water pump 2 voltage range: DC 6V-12V 3 voltage: DC 9V 4 current: zero A 5: 3 6: 45g 7 operating latest under various voltages: Voltage: DC6V Pumping current: zero Voltage: DC9V Pumping current: 0 Voltage: DC12V Pumping current: 0 eight brushless pump can also use PWM to regulate the circulation of the pump, after we measured DC12V voltage, use PWM sign responsibility ratio to adjust the move of the pump (the cover video is measured) : The crimson line is connected to the positive terminal, the black line is connected to the unfavorable terminal, and the white line is hooked up to the PWM The damaging terminal of the PWM should also be linked to the black line The pulse frequency is 2000 HZ 50% Current zero 40% Current zero 30% Current zero 20% Current zero 10% Current 0 0% Current zero ========================= Package List: Mini Water Pump x 1PCS

• 
• 
• 
• 
• 

审核