说明

• Specification Material:Anti-flammable PC Voltage:AC 230V,50/60Hz Max. Current Load: 3A/16A Temperature Accuracy: ±1℃ Temperature Setting: 10-80℃ Item Size: 86 * 86 *mm/ 3 * 3 Power Consumption:＜1WTemperature Sensor:NTC User Operation1. Power on/off: Press key to expose on/off the thermostat2. Press M key to switch between instruction manual and automatic modes. In automatic mode, press 🔼 key or 🔽 key to go into automatic transitority mode, which only runs for several minutes. Press🕐 key to enter the clock setting, and press 🔼🔽keys to regulate the price of every parameter: WiFI mannequin will automatically achieve the Internet time. 5. The little one lock is off by default at the factory. If you prefer to use this function, it is best to input the advanced choice to enable the kid lock function. Long press button for five seconds to quickly flip off it. Mode Description1. ＋floor heating handbook mode2.🕐+ floor heating automated mode Period Programming InstructionsIn the power-off state, long press key M+🕐 key, then press M key to modify options, press 🔼 key or🔽 key to regulate the parameters, and press key to go out with saving. Advanced Option SettingsIn the power-off state, press M key and🔽 key concurrently for 5 seconds to enter progressed choice environment M key to go into a better option, press🔼key and🔽 key to adjust, and press key to move out progressed option. Packing List1*Thermostat1*Sensor probe(only electric floor heating embody sensor cable)ScrewsManual Network ConnectionPress and hold 🔼🔽 button for five seconds, the WIFI icon will seem on the show of the thermostat, press 🔼 again, the icon will flash (slow flash), and the thermostat will input the code matching state.

• 
• 
• 
• 
• 

审核