说明

• LJXH 2 Wires Water Temperature Water Level Sensor Suitable for Solar Water Heater Bottom-mounted 3/4 Inch SUS Probe Specifications:Product Name: 2 Wires SensorWater Level Wire: RedTemperature Wire: YellowSensor Length: 30cmSignal Cable Length: 50cmConnection Size: 26mm (3/4") Internal ThreadOperating Voltage: 220VMounting Method: Bottom-mountingSensor Material: Stainless SteelPackage Contents: 1 x sensor Notices:1. When the ensuing disasters happen to the instrument, it can be that your sensor is broken) The water temperature shows E1, EE, 00, ninety nine or -- or the water level and water temperature soar randomly) The water level light is off or all on; the water point doesn't drop or drops quickly or rises quickly; the water point comfortable reveals up and down, but does not demonstrate in the middle) The water point is displayed, but there is no water in the water tank. There is a big error between the displayed water temperature and the particular water temperature. 2. How to ascertain a 2-wires or 4-wires sensor?1) Cut off the sensor sign cable. If there are 2 wires, choose a 2-wires sensor; if there are four wires, prefer a 4-wires sensor) Observe the fast plug of the tool sensor. If it is a 4-pin and 4-hole connection, desire a 4-wires sensor; if it's a 2-pin and 2-hole connection, desire a 2-wires sensor) Observe the indoor instrument. If the instrument sensor has solely 2 screw interfaces, then it is going to solely be connected to a 2-wires sensor; if the software sensor has 4 screw interfaces, then it is a 2-wires and 4-wires general-purpose instrument, please follow the original selection. 3. How to do the wiring?Adjust the change to the 2-wires position, and connect the signal wires to "red" and "yellow" in holding with the color. If the demonstrate is abnormal, change the wiring positions.

• 
• 
• 
• 
•