说明

• S5M type; gap diameter 12mm and 14mm; sixteen teeth; belt width 25mm, AF shape About the pulleys for embroidery machines, some essential records might be given to determine the pulley 1 Tooth type: Usually embroidery machines adopts 5M, S5M, 8M, S8M enamel kind Most of the Tajima embroidery machines adopts S5M tooth kind AT5, T5, T10 also exist 2 Teeth number of the pulley This is important Please confirm what number of teeth the pulley has three Hole diameter Measure the opening diameter of the pulley through a caliper Usually there are bearings have been insert into the pully, you probably have the bearing model, then you can examine the outer diameter of the bearing The outer diameter of the bearing is the diameter of the pulley gap 4 Width of the belt Usually the width of the pulley for belt is a little bit greater than the belt applied, as an example if the belt is 35mm, the pulley space for belt could be 36mm or 37mm After you've these 4 datas, you may decide the pulley in keeping with the form like AF, BF, KF, etc If you can&;t find the pulley you would like within the store, please send these datas to us, we're glade to aid

审核