我们向您展示运往United States的商品。要查看运往其他国家的商品,请更改您的配送地区。
Product name: Glass UV curing lamp Product size: about 16cm * 5 / 6 * 2 Product color: black Product function: repair the curing of auto glass and resin, lights How to use: Press the button to TORCH to flashlight by way of hand, press the button to TUBE to solve the resin, and shut it within the middle. Product power supply: It uses four AA batteries to start. (Not included at the time of delivery) Packing list: glass UV curing lamp (not including battery) *1 Instructions: 1. Push the substitute ahead by way of means of hand to remove darkness from the flashlight, and push the switch backward for the ultraviolet light. The center is closed. 2. Turn on the UV lamp, close to the curing film, about 1-2 minutes to finish the initial curing of the repair solution, if the repair decision is too much, you will need to broaden the time as appropriate, subject to the particular curing. 3. Pay attention to the superb and detrimental poles of the AA battery. If the light is dim, replace the battery. 4. Use 4 AA batteries to power (the product does not consist of batteries) (Nanfu alkaline batteries should not recommended, because the penalties of using Nanfu alkaline batteries are borne through yourself, and carbon batteries are required, which is simply a few cents. One section)